PUMP GP-GOV & FUEL INJ 6I2356 - Caterpillar

Breathing ether vapors or repeated contact of ether with skin can cause personal injury. Personal injury may occur from failure to adhere to the following procedures.Use ether only in well ventilated areas.Do not smoke while changing ether cylinders.Use ether with care to avoid fires.Do not store replacement ether cylinders in living areas or in the operator's compartment.Do not store ether cylinders in direct sunlight or at temperatures above 49 °C (120 °F).Discard cylinders in a safe place. Do not puncture or burn cylinders.Keep ether cylinders out of the reach of unauthorized personnel.To avoid possible injury, be sure the brakes are applied and all controls are in Hold or Neutral when starting the engine.
Illustration 1 g01157194The ether starting aid cylinder is mounted on the right side of the engine compartment underneath the engine hood.
Loosen ether cylinder retaining clamp (1). Unscrew the ether cylinder.
Remove used gasket (2). Install the new gasket. A new gasket is provided with each new ether cylinder.
Install the new ether cylinder. Tighten the ether cylinder hand tight. Tighten the cylinder retaining clamp with your fingers.
Close the access cover. Install the bolts for the cover.