PUMP GP-SUMP 6N3218 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Remove the left side engine panel.
Illustration 1 g00829951
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Disconnect harness assembly (2) .
Remove bolts (4) .
Remove fuel shutoff solenoid (1), the spring, and the washer.
Remove cover (3) from the housing.
Illustration 2 g00840262
Remove retaining ring (5), washer (6), and plunger (7) from the housing.Installation Procedure
Illustration 3 g00840262
Install plunger (7), washer (6), and retaining ring (5) in the housing.
Illustration 4 g00829951
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Install cover (3) in the housing.
Install the washer, the spring, and fuel shutoff solenoid (1) to the original location and install bolts (4) .
Connect harness assembly (2) .
Install the left side engine panel.