6R1954 PUMP GP-STEERING Caterpillar parts
CP-563
Rating:
Alternative (cross code) number:
CA6R1954
6R-1954
6R1954
CA6R1954
6R-1954
6R1954
Weight: 20 pounds 9 kg.
VIBRATORY COMPACTOR,
This part in 2 request:
Show.
This information for suppliers only!
2023-12-09
2019-06-11
Compatible equipment models: 6R1954:
Number on catalog scheme:
7
For full view, you need register
Information:
Remove & Install Engine Oil Cooler
Start By:a. remove oil filter and oil filter base FLUID SPILLAGE CONTAINMENT Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "TOOLS AND SHOP PRODUCT GUIDE, NENG2500", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates.
3304 Engine Shown
3306 Engine Shown1. Drain the coolant from the cooling system into a suitable container for storage or disposal.2. On 3306 Engines, loosen the clamp and remove the bolts that hold pipe (1) on the rear side of the oil cooler. Remove the pipe and gasket from the engine.3. Remove all bolts (4), elbow (5) and the gaskets from the engine.4. Remove bolts (2), core assembly (3) and the gasket.5. If necessary, loosen clamp (6), and remove bolt (8) and pipe (7) from the engine. 6. On 3306 engines, remove the bolts and elbows (9) and (11) from core assembly (3). Remove O-ring seals (10) from the elbows.7. Clean the tube bundles in the core assembly with a 3.18 mm (.125 in) diameter rod. The following steps are for the installation of the engine oil cooler.8. On 3306 Engines, install O-ring seals (10) in elbows (9) and (11). Put the elbows in position on core assembly (3) as shown, and install the bolts that hold them.9. Put pipe (7) in position on the engine, and install the bolt and clamp that hold it.10. Put core assembly (3) and the gasket in position on pipe (2), and install the bolts that hold it.11. Put the gaskets and elbow (5) in position on the cylinder block and the core assembly, and install the bolts that hold it.12. On 3306 Engines, install the gasket and pipe (1).13. Fill the cooling system with coolant to the correct level. See the Operation & Maintenance Manual.End By:a. install oil filter base
Start By:a. remove oil filter and oil filter base FLUID SPILLAGE CONTAINMENT Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "TOOLS AND SHOP PRODUCT GUIDE, NENG2500", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates.
3304 Engine Shown
3306 Engine Shown1. Drain the coolant from the cooling system into a suitable container for storage or disposal.2. On 3306 Engines, loosen the clamp and remove the bolts that hold pipe (1) on the rear side of the oil cooler. Remove the pipe and gasket from the engine.3. Remove all bolts (4), elbow (5) and the gaskets from the engine.4. Remove bolts (2), core assembly (3) and the gasket.5. If necessary, loosen clamp (6), and remove bolt (8) and pipe (7) from the engine. 6. On 3306 engines, remove the bolts and elbows (9) and (11) from core assembly (3). Remove O-ring seals (10) from the elbows.7. Clean the tube bundles in the core assembly with a 3.18 mm (.125 in) diameter rod. The following steps are for the installation of the engine oil cooler.8. On 3306 Engines, install O-ring seals (10) in elbows (9) and (11). Put the elbows in position on core assembly (3) as shown, and install the bolts that hold them.9. Put pipe (7) in position on the engine, and install the bolt and clamp that hold it.10. Put core assembly (3) and the gasket in position on pipe (2), and install the bolts that hold it.11. Put the gaskets and elbow (5) in position on the cylinder block and the core assembly, and install the bolts that hold it.12. On 3306 Engines, install the gasket and pipe (1).13. Fill the cooling system with coolant to the correct level. See the Operation & Maintenance Manual.End By:a. install oil filter base
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 3114, 3116, 320B, 322B, 322B L, 322B LN, 322C, 322C FM, 325B, 325B L, 446B, 446D, 539, 561M, 613C II, 924F, 928G, 938F, 938G, 950F, 950F II, 953C, 963B, 963C, AP...
120H, 120H ES, 120H NA, 135H, 135H NA, 213B, 214B, 224B, 30/30, 3116, 3126, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 45, 55, 561M, 613C II, 928F, 92...
3114, 3116, 533, 543, 910E, 918F, 924F, 953B, AP-1000, AP-1000B, AP-1050, AP-1055B, BG-2455C, BG-245C, CB-434, CB-634C, CB-634D, CP-563, CS-531, CS-531C, CS-533, CS-533C, CS-563C, CS-573, CS-573C, CS-...
1031975
PUMP GP-MOUNTING
CP-563
CP-563
235, 3114, 3116, 3204, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 350, 45, 508, 528, 528B, 530B, 545, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 627G, 637D, 637E, 637G, 639D, 65, 65C, 70C, 91...
213B, 214B, 224B, 3116, 320 L, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 613C II, 928F, 938F, 950F, 950F II, 953B, 960F, AP-1000, AP-1050, CB-634, CP-563, CS-531, CS-533, CS-533C, CS-573, CS-583, D25...
235, 3114, 3116, 3204, 330, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 3412, 3412C, 350, 45, 508, 528, 528B, 530B, 545, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 627G, 637D, 637E, 637G, 639D, 65, 65C, 7...
CP-563, CS-531, CS-531C, CS-531D, CS-533, CS-533C, CS-533D, CS-563C, CS-563D, CS-573, CS-573C, CS-573D, CS-583, CS-583C, CS-583D, CS-663E, CS-683E
3114, 3116, 533, 543, 924F, AP-1000, AP-1000B, AP-1050, AP-1055B, BG-2455C, BG-245C, CB-634C, CB-634D, CP-563, CS-531C, CS-533C, CS-563C, CS-573C, CS-583C, IT12B, IT24F, TK370, TK371, TK380, TK381
1G8029
PUMP GP-HYDRAULIC
CP-563, CS-533, CS-573, CS-583
CP-563, CS-533, CS-573, CS-583
1430770
PUMP GP-CAB TILT
CP-563, CS-563C, CS-583C, PS-500
CP-563, CS-563C, CS-583C, PS-500
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325B, 325B L, 45, 55, 561M, 613C II, 928F, 928G, 938F, 938G, 950F, 950F...
320D, 320D GC, 320D L, 323D L, 323D LN, 323D2 L, 336D2, 336D2 L, 340D2 L, 627K LRC, 725C
3479405
PUMP & MOTOR GP
966K, 966M XE, 972M XE
966K, 966M XE, 972M XE
2348803
PUMP GP-TRANSMISSION
928HZ, 930G
928HZ, 930G
1110117
PUMP GP-GEAR
980G
980G
1220504
PUMP GP-AUXILIARY WATER
793B, 793C
793B, 793C
7N1317
PUMP GP-FUEL INJECTION
3406, 3406B
3406, 3406B