PUMP G-HAND 6V9061 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
Illustration 1 g01052043
Install Tooling (A) and a suitable lifting device onto oil pump (17). Install oil pump (17) into the drive. The weight of oil pump (17) is approximately 45 kg (100 lb).
Install bolts (16).
Illustration 2 g00916838
Remove the suitable lifting device and Tooling (A) from the oil pump.
Illustration 3 g00916836
Install bolts (15).
Illustration 4 g01052041
Install the elbow and tube (13) and install bolts (14).
Illustration 5 g01052039
Install guards (12). Install nuts (10) and bolts (11).
Illustration 6 g01052037
Install tube (9) and elbow (6).
Illustration 7 g01052034
Install housing (4). Install bolts (5) that hold housing (4) to the water pump.
Install bracket (1) and bolts (2).
Install bolts (3) onto the clamps.
Install elbow (6) and bolts (7).
Connect harness assembly (8).
Fill the cooling system with coolant. Refer to the Operation and Maintenance Manual. End By:
Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".