PUMP GP-AUXILIARY WATER 7E9782 - Caterpillar

Illustration 2 g03335133
Table 2
Item Qty Part Specification Description
5 2 4W-4813 Plug Torque to 100 15 N m (74 11 lb ft).
6 8 352-6061 Liner Seal Assemble dry seals on clean and dry liner grooves.
Before assembly, cover seals with either P-80 Rubber Lubricant Emulsion or liquid soap.
7 24 7N-2046 O-Ring Seal Before assembly, cover seals with either P-80 Rubber Lubricant Emulsion or liquid soap.
8 20 7X-7925 Bolt Use the following procedure in order to tighten the crankshaft bearing cap bolts.
1. Before assembly, Lubricate the threads with clean engine oil .
2. Tighten the bolts by hand.
3. Tighten the bolts in the numerical sequence as shown in Illustration 2 to 190 14 N m (140 10 lb ft).
4. Again tighten the bolts to an additional angle of 180 5 degrees
Illustration 3 g03335134
Right side view
Table 3
Item Qty Part Specification Description
9 1 4W-4814 Adapter Torque to 100 15 N m (74 11 lb ft).
10 4 5F-9657 O-Ring Seal Lubricate the bore lightly with sealant that is being sealed.
G 3 7N-2047 Dowel Extension of the dowel is 6.0 0.5 mm (0.24 0.02 inch).
H 2 4N-0683 Dowel Extension of the dowel is 19.0 0.5 mm (0.75 0.02 inch).
J 2 7N-2044 Dowel Extension of the dowel is 40.0 0.5 mm (1.58 0.02 inch).