7J0586 PUMP GP-VANE Caterpillar parts
140, 141
Rating:
Alternative (cross code) number:
CA7J0586
7J-0586
7J0586
CA7J0586
7J-0586
7J0586
Weight: 30 pounds 13 kg.
HYDRAULIC CONTROL,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Replacement Parts for Snow Removal UTV ATV Cart Machinery for 7J0586 Replacement HYD Pump 561C, D5, D6 Pipelayer for CAT Model-DFC589-Gl47914
Generic Premium replacement parts for lawn and garden, snow removal, UTV, ATV, and golf cart equipment, built to last || Crafted from high-quality, weather-resistant materials for durability in any conditions || Easy-to-install parts that fit perfectly, saving you time and effort on maintenance || Ideal for extending the life and efficiency of your machinery, reducing the need for costly replacements || Suitable for a wide range of brands and models, providing flexible options for various equipment types
Generic Premium replacement parts for lawn and garden, snow removal, UTV, ATV, and golf cart equipment, built to last || Crafted from high-quality, weather-resistant materials for durability in any conditions || Easy-to-install parts that fit perfectly, saving you time and effort on maintenance || Ideal for extending the life and efficiency of your machinery, reducing the need for costly replacements || Suitable for a wide range of brands and models, providing flexible options for various equipment types
$810.63
28 Jan 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Pump G 7J0586 New
$507.60
02 Jun 2022
32.3638[14.56] Pounds
US: ProperBuy
CTP Caterpillar Pump G (7j0586) Aftermarket
CTP
CTP
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: The engines are equipped with either an aluminum valve mechanism cover or with a composite valve mechanism cover. The aluminum valve mechanism cover has a seal that fits between the valve mechanism cover and the inlet and exhaust manifold. The composite valve cover has a seal that is permanently fixed to the side of the valve mechanism cover.
Illustration 1 g00848061
Remove three nuts (3), steel washers (4), and sealing washers (5) .Note: When you remove nuts (3), ensure that the nuts on the rocker arm bracket are not loosened.
Remove valve mechanism cover (1), gasket (7), and seal (6) from the cylinder head.
Remove seal (2) for the oil filler cap.Installation Procedure
Note: The engines are equipped with either an aluminum valve mechanism cover or with a composite valve mechanism cover. The aluminum valve mechanism cover has a seal that fits between the valve mechanism cover and the inlet and exhaust manifold. The composite valve cover has a seal that is permanently fixed to the side of the valve mechanism cover.
Inspect the condition of the gaskets and the seals. Replace the gaskets and the seals, if necessary.
Install seal (2) for the oil filler cap, if necessary.
Apply 8T-9022 Silicone Gasket to gasket (7) .Note: Ensure that the flat face of the gasket is toward the valve cover.
Install gasket (7), seal (6), and valve cover (1) on the cylinder head.
Lubricate three nuts (3) with clean engine oil.
Install three nuts (3), steel washers (4), and sealing washers (5) .Note: If a composite valve mechanism cover is installed, tighten nuts (3) to a torque of 12 N m (9 lb ft). Do not overtighten the nuts.Note: If an aluminum valve mechanism cover is installed, tighten nuts (3) to a torque of 20 N m (15 lb ft). Do not overtighten the nuts.Note: On some engines, the nut for the aluminum valve mechanism cover has an additional washer. Tighten nuts (3) to a torque of 30 N m (22 lb ft). Do not overtighten the nuts.
Connect the breather hose, if equipped. Tighten the hose clamp.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: The engines are equipped with either an aluminum valve mechanism cover or with a composite valve mechanism cover. The aluminum valve mechanism cover has a seal that fits between the valve mechanism cover and the inlet and exhaust manifold. The composite valve cover has a seal that is permanently fixed to the side of the valve mechanism cover.
Illustration 1 g00848061
Remove three nuts (3), steel washers (4), and sealing washers (5) .Note: When you remove nuts (3), ensure that the nuts on the rocker arm bracket are not loosened.
Remove valve mechanism cover (1), gasket (7), and seal (6) from the cylinder head.
Remove seal (2) for the oil filler cap.Installation Procedure
Note: The engines are equipped with either an aluminum valve mechanism cover or with a composite valve mechanism cover. The aluminum valve mechanism cover has a seal that fits between the valve mechanism cover and the inlet and exhaust manifold. The composite valve cover has a seal that is permanently fixed to the side of the valve mechanism cover.
Inspect the condition of the gaskets and the seals. Replace the gaskets and the seals, if necessary.
Install seal (2) for the oil filler cap, if necessary.
Apply 8T-9022 Silicone Gasket to gasket (7) .Note: Ensure that the flat face of the gasket is toward the valve cover.
Install gasket (7), seal (6), and valve cover (1) on the cylinder head.
Lubricate three nuts (3) with clean engine oil.
Install three nuts (3), steel washers (4), and sealing washers (5) .Note: If a composite valve mechanism cover is installed, tighten nuts (3) to a torque of 12 N m (9 lb ft). Do not overtighten the nuts.Note: If an aluminum valve mechanism cover is installed, tighten nuts (3) to a torque of 20 N m (15 lb ft). Do not overtighten the nuts.Note: On some engines, the nut for the aluminum valve mechanism cover has an additional washer. Tighten nuts (3) to a torque of 30 N m (22 lb ft). Do not overtighten the nuts.
Connect the breather hose, if equipped. Tighten the hose clamp.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
8J8483
PUMP GP-VANE
140, 141, 153, D4E, D4E SR
140, 141, 153, D4E, D4E SR
4J0196
PUMP AND MOUNTING GROUP
141, 191
141, 191
140, 141, 153, D4E, D4E SR
5J8931
PUMP LINES GROUP
140, 141, 561C
140, 141, 561C
4J9552
PUMP AND MOUNTING GROUP
140, 141, 191, 561C
140, 141, 191, 561C
140, 141, 153, D4E, D4E SR
4J3460
PUMP LINES GROUP
141, 191
141, 191
4K6275
PUMP LINES GROUP
141, 191
141, 191
5K1368
PUMP LINES GROUP
141, 191
141, 191
141, 191, G398
141, 191
141, 191
7J0597
PUMP GP-VANE
824S
824S
6J9861
PUMP AND MOUNTING GROUP
824B, 824S, 834
824B, 824S, 834
2N7537
PUMP GP-PRELUBE
D399, G399
D399, G399
2N8474
PUMP GP-PRELUBE
D399, G399
D399, G399
6K5166
PUMP LINES GROUP
140, 141
140, 141