7L4823 PUMP GP-WATER Caterpillar parts
D346, D348, D349
Rating:
Alternative (cross code) number:
CA7L4823
7L-4823
7L4823
CA7L4823
7L-4823
7L4823
Weight: 52 pounds 23 kg.
INDUSTRIAL ENGINE, MARINE ENGINE,
Related part:
7L4823
PUMP GP-WATER
0R0812
R
This part in 10 request:
Show.
This information for suppliers only!
2025-03-27
2025-03-05
2025-01-10
2024-09-19
2022-01-05
2021-05-06
2021-01-11
2020-03-03
2019-12-23
2018-11-19
Compatible equipment models: 7L4823:
Information:
TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
The engine can have the ability to auto start. Ensure that the power supply is isolated before any service or repairs is performed.
Place a suitable container below the engine oil filter base in order to catch any oil that might be spilled.
Illustration 1 g01609693
Use Tooling (A) to remove engine oil filter (7). Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Remove bolts (4).
Remove engine oil filter base (2).
Remove gasket (1).
If necessary, remove plug (6) from engine oil filter base (2). Remove O-ring seal (5) from the plug. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01609693
Clean engine oil filter base (2). Clean the gasket surfaces of the cylinder block and oil filter base.
If necessary, install new O-ring seal (5) to plug (6). Install plug (6) to engine oil filter base (2). Tighten the plugs to a torque of 12 N m (106 lb in).
Install bolts (4) to engine oil filter base (2).
Install a new gasket (1) onto bolts (4). Install the assembly of the engine oil filter base to the cylinder block.
Tighten bolts (4) to a torque of 22 N m (16 lb ft).
Install a new engine oil filter (7) and check the level of the engine lubricating oil. Refer to Operation and Maintenance Manual, "Engine Oil Level - Check" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
The engine can have the ability to auto start. Ensure that the power supply is isolated before any service or repairs is performed.
Place a suitable container below the engine oil filter base in order to catch any oil that might be spilled.
Illustration 1 g01609693
Use Tooling (A) to remove engine oil filter (7). Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Remove bolts (4).
Remove engine oil filter base (2).
Remove gasket (1).
If necessary, remove plug (6) from engine oil filter base (2). Remove O-ring seal (5) from the plug. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01609693
Clean engine oil filter base (2). Clean the gasket surfaces of the cylinder block and oil filter base.
If necessary, install new O-ring seal (5) to plug (6). Install plug (6) to engine oil filter base (2). Tighten the plugs to a torque of 12 N m (106 lb in).
Install bolts (4) to engine oil filter base (2).
Install a new gasket (1) onto bolts (4). Install the assembly of the engine oil filter base to the cylinder block.
Tighten bolts (4) to a torque of 22 N m (16 lb ft).
Install a new engine oil filter (7) and check the level of the engine lubricating oil. Refer to Operation and Maintenance Manual, "Engine Oil Level - Check" for the correct procedure.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D348 ENGINE 36J00561-UP »
7L-4823
PUMP GP-WATER
D348 ENGINE 36J00561-UP »
7L-4823
PUMP GP-WATER
D348 MARINE ENGINE 38J00193-UP »
7L-4823
PUMP GP-WATER
D348 MARINE ENGINE 38J00193-UP »
7L-4823
PUMP GP-WATER
D348 MARINE ENGINE 38J00001-00192 »
7L-4823
PUMP GP-WATER
D348 MARINE ENGINE 38J00001-00192 »
7L-4823
PUMP GP-WATER
D348 ENGINE 36J00001-00560 »
7L-4823
PUMP GP-WATER
D348 ENGINE 36J00001-00560 »
7L-4823
PUMP GP-WATER
D346 ENGINE 39J00001-UP »
7L-4823
PUMP GP-WATER
D346 ENGINE 39J00001-UP »
7L-4823
PUMP GP-WATER
D346 MARINE ENGINE 40J00001-UP »
7L-4823
PUMP GP-WATER
D346 MARINE ENGINE 40J00001-UP »
7L-4823
PUMP GP-WATER
D349 MARINE ENGINE 62P00001-UP »
7L-4823
PUMP GP-WATER
D349 ENGINE 61P00001-UP »
7L-4823
PUMP GP-WATER
D349 ENGINE 61P00001-UP »
7L-4823
PUMP GP-WATER
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
3N2078
PUMP GP-FUEL TRANSFER
D346, D348, D349, D379, D379A, D379B, D398, D398A, D398B, D399
D346, D348, D349, D379, D379A, D379B, D398, D398A, D398B, D399
7N8599
PUMP GP-FUEL PRIMING
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 994D, D348, D349, D379, D379A, D379B, D398, D398A, D398B, D399, PM3508, PM3512, PM3516, PP3516, TH48-E80
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 994D, D348, D349, D379, D379A, D379B, D398, D398A, D398B, D399, PM3508, PM3512, PM3516, PP3516, TH48-E80
4N7819
PUMP & MOTOR AS-PRELUB
D349, D399, G399
D349, D399, G399
3N0706
PUMP & MOTOR AS-PRELUBE
D349, D399, G399
D349, D399, G399
1N9208
PUMP GP-WATER
D346, D348, D349
D346, D348, D349
6N5599
PUMP & MOTOR AS-PRELUBE
3512, D349, D399, G399
3512, D349, D399, G399
1W2456
PUMP GP-OIL
D348, D349
D348, D349
1N8351
PUMP GP-SEA WATER
D346, D348, D349
D346, D348, D349
3N0592
PUMP & MOTOR GP
D349, D399, G399
D349, D399, G399
6N5598
PUMP & MOTOR AS-PRELUBE
D349, D399, G399
D349, D399, G399
7N0175
PUMP & MOTOR GP
D349, D399
D349, D399
3S1467
PUMP ASSEM.
641B, 772, 777, 992, D346, D348, D349
641B, 772, 777, 992, D346, D348, D349
6T6147
PUMP GP-GEAR
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D
6Y1259
PUMP GP-GEAR
D6H, D6H XL, D6H XR
D6H, D6H XL, D6H XR
4N5837
PUMP GP-WATER
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 844, 844H, 990, 990 II, 990H, 992C, 992D, AD55B, AD60, C27, C30, C32, CG137-12, CX35-P800, D10N...
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 844, 844H, 990, 990 II, 990H, 992C, 992D, AD55B, AD60, C27, C30, C32, CG137-12, CX35-P800, D10N...
9Y4161
PUMP GP-WATER
3176, 3176B, 75, 75C
3176, 3176B, 75, 75C
2835975
PUMP GP-MAIN HYDRAULIC
345B II
345B II
9Y1796
PUMP GP-FUEL INJECTION
3126, 3508, 3512, 3516, 777B, 785, 789, 994, D11N
3126, 3508, 3512, 3516, 777B, 785, 789, 994, D11N
2998964
PUMP & MTG GP-HYDRAULIC
C11, C13, C15, C18, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, TH31-E61, TH35-C11I, TH35-C13I, TH35-C15I
C11, C13, C15, C18, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, TH31-E61, TH35-C11I, TH35-C13I, TH35-C15I
7N8715
PUMP GP-ENGINE OIL
3126, 3508, 3508B, 3508C, 3512, 5130, 5130B, 776C, 776D, 777, 777B, 777C, 777D, 854G, 992G, D11N, D11R, G3508, G3508B, G3512, PM3508
3126, 3508, 3508B, 3508C, 3512, 5130, 5130B, 776C, 776D, 777, 777B, 777C, 777D, 854G, 992G, D11N, D11R, G3508, G3508B, G3512, PM3508
1993128
PUMP & MTG GP-HYDRAULIC FAN
938G II, IT38G II
938G II, IT38G II
1091666
PUMP GP-PISTON
RM-350B, SM-350
RM-350B, SM-350
6R0462
PUMP AS-HYDRAULIC
RR-250, SS-250
RR-250, SS-250