PUMP GP-GOV & FUEL INJ 7N7576 - Caterpillar

Separate
Table 1
Required Tools
Tool Part Number Description Qty
A 5P-2379 Press Frame 1
8S-7172 Hydraulic Cylinder 1
8S-9903 Track Press Rollover Gp 1
B 1P-3532 Track Block Assembly 1
Start the engine. Park the machine on a hard, level surface. Position the machine so that the master link is located at the 10 o'clock position of the sprocket.
Illustration 1 g01278245
Remove bolts (1) and remove cover (2).
Illustration 2 g01278247
Release the tension on the track assembly. Loosen relief valve (3) by one turn only. If the track assembly does not loosen after opening the relief valve, move the machine forward and backward until the tension is released.
Illustration 3 g01019654
Attach a suitable lifting device to the track shoe, as shown. Remove four mounting bolts (4) for each track shoe and remove track shoes (5) and (6). The weight of each track shoe is approximately 35 kg (75 lb).
Illustration 4 g01019750
Use Tooling (A) and (B), and a suitable lifting device in order to separate the master link. Use a suitable lifting device in order to raise the track from Tooling (B). Remove Tooling (B) and lower the track assembly to the floor.