7X7176 PUMP AS-CHARGE Caterpillar parts
CS-551
Rating:
Alternative (cross code) number:
CA7X7176
7X-7176
7X7176
CA7X7176
7X-7176
7X7176
Weight: 18 pounds 8 kg.
VIBRATORY COMPACTOR,
Compatible equipment models: 7X7176:
Number on catalog scheme:
37
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3 Start By:
Remove the gerotor motor. Refer to Disassembly and Assembly, "Gerotor Motor (Circle Drive) - Remove" for the correct procedure.
Illustration 1 g00821403
Bend lock (1) away from nut (2) .
Remove nut (2), lock (1), spacer (3), and the O-ring seal from shaft (6) .
Remove four nuts (5) and remove the washers from the long studs of the circle drive housing.
Illustration 2 g00635561
Install Tooling (A). Position a hoist to Tooling (A).
Remove two bolts (8) and the spacers that hold the circle drive housing to the circle drawbar.
Lift the circle drive approximately 13.0 mm (.50 inch) in order to disengage pinion gear (4) from the circle. Remove pinion gear (4) and washer (7) from shaft (6) .
Remove the circle drive from the circle. The weight of the circle drive is 45 kg (100 lb).
Remove the Duo-Cone seal from the pinion.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3 Start By:
Remove the gerotor motor. Refer to Disassembly and Assembly, "Gerotor Motor (Circle Drive) - Remove" for the correct procedure.
Illustration 1 g00821403
Bend lock (1) away from nut (2) .
Remove nut (2), lock (1), spacer (3), and the O-ring seal from shaft (6) .
Remove four nuts (5) and remove the washers from the long studs of the circle drive housing.
Illustration 2 g00635561
Install Tooling (A). Position a hoist to Tooling (A).
Remove two bolts (8) and the spacers that hold the circle drive housing to the circle drawbar.
Lift the circle drive approximately 13.0 mm (.50 inch) in order to disengage pinion gear (4) from the circle. Remove pinion gear (4) and washer (7) from shaft (6) .
Remove the circle drive from the circle. The weight of the circle drive is 45 kg (100 lb).
Remove the Duo-Cone seal from the pinion.
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
9Y0492
PUMP GP-GOV & FUEL INJ
3208, CB-614, CS-551, PS-500
3208, CB-614, CS-551, PS-500
9Y0509
PUMP GP-GOV & FUEL INJ
225, 227, 229, 3208, CB-614, CS-551, PS-500
225, 227, 229, 3208, CB-614, CS-551, PS-500
9Y0511
PUMP GP-GOV & FUEL INJ
225, 227, 229, 3208, CB-614, CS-551, PS-500
225, 227, 229, 3208, CB-614, CS-551, PS-500
4W5636
PUMP GP-GOV & FUEL INJ
225, 227, 3208, CB-614, CS-551, PS-500
225, 227, 3208, CB-614, CS-551, PS-500
9Y0491
PUMP GP-GOV & FUEL INJ
3208, CB-614, CS-551, PS-500
3208, CB-614, CS-551, PS-500
9Y0512
PUMP GP-GOV & FUEL INJ
225, 227, 229, 3208, CB-614, CS-551, PS-500
225, 227, 229, 3208, CB-614, CS-551, PS-500
4W5607
PUMP GP-GOV & FUEL INJ
3208, CB-614, CS-551, PS-500
3208, CB-614, CS-551, PS-500
4W5641
PUMP GP-GOV & FUEL INJ
225, 227, 229, 3208, CB-614, CS-551, PS-500
225, 227, 229, 3208, CB-614, CS-551, PS-500
140B, 1673C, 225, 225D, 227, 229, 231D, 3116, 3126, 3208, 3304, 3306, 518, 528, 571G, 572G, 613C, 627B, 637D, 639D, 814, 815, 816, 910, 920, 930, 931B, 931C, 931C II, 935B, 935C, 935C II, 950, 966C, 9...
CS-551
0984195
PUMP GP-HYDRAULIC
CS-551
CS-551
0980197
PUMP GP-HYDRAULIC
CS-551
CS-551
7R6071
PUMP-GEAR BOX
CB-614
CB-614
7C1285
PUMP GP-WATER
AP-1200
AP-1200
0868955
PUMP GP
CP-563
CP-563
1G5766
PUMP
RR-250
RR-250
7R3176
PUMP AS
AP-800
AP-800
0826844
PUMP AS
PS-300
PS-300
1263543
PUMP-CHARGE
SS-250
SS-250
6R2546
PUMP-CHARGE
AP-800
AP-800
8T6302
PUMP-HYDRAULIC
PR-450
PR-450
6R0769
PUMP GP
CS-323
CS-323
7R9512
PUMP-DRIVE
CS-551
CS-551
9X0802
PUMP
SS-250
SS-250