PUMP-HYDRO 8C0302 - Caterpillar

Removal Procedure
Illustration 1 g01233401
Remove bolts (1), the washers, and cover (2) .
Illustration 2 g01233409
Disconnect harness assembly (3). Remove bolts (4) and sensor (5) .
Illustration 3 g01233426
Attach a suitable lifting device to pin assembly (6). The combined weight of the kickout mechanism and pin assembly (6) is approximately 68 kg (150 lb).
Illustration 4 g01233430
Remove bolts (7) and the washers.
Illustration 5 g01233456
Carefully slide kickout mechanism (8) to the minimum distance that is needed to install a second suitable lifting device to the kickout mechanism.
Illustration 6 g01233468
Remove bolts (9), the washers, and pin assembly (6) .
Illustration 7 g01233482
Illustration 8 g01233485
Spring force can cause personal injury or death.Do not repair until you have read the Operation and Maintenance Manual.
Position kickout mechanism (8) into a suitable press in order to remove the cotter pin, nut (10) and the washer.
Illustration 9 g01233489
Once the spring tension has been released, remove collar (11) and rod assembly (13) from spring (12) .Note: When spring (11) is compressed, Dimension (X) should be 714 3 mm (28.1 0.1 inch). The free length of spring (11) is 748 mm (29.4 inch).