PUMP GP-STEERING 8U6840 - Caterpillar

Wheel Loader:
924G (S/N: DDA2592-UP; RBB1428-UP; WMB1046-UP)
924GZ (S/N: RTA696-UP; WGX1019-UP)
924H (S/N: HXC1-UP; JTM1-UP)
924HZ (S/N: PED1-UP)
928G (S/N: DJD2294-UP; WLG906-UP)
928HZ (S/N: BYD1-UP; CXK1-UP)
930G (S/N: TWR1521-UP; TFW388-UP)
930H (S/N: DHC1-UP; FTD1-UP)
Description of Change: The new procedure for setting the amount of free length for the wires is being used for the wiring of the joystick control. The new procedure will help prevent the wires from kinking or failing.Adaptable To: The same joysticks are being used. The wire free length has been increased to 190 mm (7.5 inch) for the listed machines. The increased wire free length will help prevent the wires from getting kinked or even broken. Refer to the Special Instruction, REHS4471, "Procedure To Lengthen The Wires In The Joystick" for the proper procedure of routing the wires for the joystick control.The new procedure for wiring of the joystick control is adaptable to the following machines:
924G DDA2592-UP, RBB1428-1641 and WMB1046-1496
924GZ RTA696-900 and WGX1019-1510
924 H HXC1-619 and JTM1-UP
924HZ PED1-UP
928G DJD2294-UP and WLG906-1259
928HZ BYD1-UP and CXK1-698
930 G TWR1521-UP and TFW388-983
930 H DHC1-336 and FTD1-UPThe new procedure for wiring of the joystick control is effective in production on the following machines:
924G RBB1642-UP and WMB1497-UP
924GZ RTA901-UP and WGX1511-UP
924 H HXC620-UP
928G WLG1260-UP
928HZ CXK699-UP
930 G TFW984-UP
930 H DHC337-UP