PUMP & MTG GP-PISTON 8W6540 - Caterpillar

Illustration 1 g06209586There are several specific messages on this machine. The location of the messages and the description of the messages are reviewed in this section. Become familiarized with all messages.Make sure that all the messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any Caterpillar dealer can provide new messages.ELC (1) - Extended Life Coolant
This message is located underneath the access door for the radiator cap.
Illustration 2 g01211116No Weld/No Drill (2)
This message is on the left post inside the cab.
Illustration 3 g01212169Product Link (3)
Illustration 4 g01418953If your machine is equipped with the Product Link System, this additional message is located in the cab on the rear left C post.The Product Link System has the capability of two-way communication between the machine and a remote user. Data is transmitted from the machine. The receiving station transmits the data to Caterpillar Inc. All logged events and diagnostic codes that are available to the Caterpillar Electronic Technician (ET) on the CAT data link can be sent to the Product Link System. The information is used to improve Caterpillar products and Caterpillar services.The Product Link is also available in cellular format.Refer to Operation and Maintenance Manual, "Product Link" for more information.Machine Movement (4)
This message is located near the steering control lever.
Illustration 5 g01024657
When the steering lever is moved with the transmission in NEUTRAL or in gear, and the engine is running, the machine will turn. Engage the parking brake in order to prevent machine movement.
Air Conditioner (5)
This message is on the heater and air conditioner group underneath the left-hand access door.
Illustration 6 g00927763This message for the air conditioner has the appropriate information for the following services: the air conditioner lubricant, the refrigerant charge, and the refrigerant capacity. Also, this safety message instructs the usage of the proper safety information.Air Cleaner (6)
This message is on the cover of the air cleaner.
Illustration 7 g01785473To avoid engine damage, use only Caterpillar radial seal air filters as replacement filters. Refer to the following topics for correct replacement instructions:
Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace"
Operation and Maintenance Manual, "Engine Air Filter Secondary Element - Replace"