PUMP & MTG GP-DRIVE LUBE 8X0065 - Caterpillar

Interlock Override (If Equipped) - The interlock override function allows the auxiliary hydraulic circuits to function with the armrest in the RAISED position. First activate the continuous flow function. If the machine is equipped with a single function switch then press the bottom of the switch in order to activate the interlock override. If the machine is equipped with a dual function switch then press the top of the switch in order to activate the interlock override function. In order to turn off the interlock override function and continuous flow function, press either side of the auxiliary hydraulic switch or Interlock Override switch.
Do not leave the machine unattended while you have the interlock override function activated.
Rear Auxiliary Hydraulic Control or Fourth Function Control (28)
Illustration 9 g00902830
Illustration 10 g00902834
Fourth Function Control (If Equipped) - The fourth function control provides electrical power in order to control a three-position diverter valve that is located on some work tools. Press the right side of the switch (C1) in order to send power to the pin (A). Press the left side of the switch (C2) in order to send power to pin (B) .Rear Auxiliary Hydraulic Control (If Equipped) - In order to activate the rear auxiliary hydraulics, activate the continuous flow function for the front auxiliary hydraulics. Press the left side of the switch in order to direct flow to the lower rear hydraulic line. Press the right side of the switch in order to direct flow to the upper rear hydraulic line.Temperature Control (29)
Temperature Control (If Equipped) Suspension Seat (30)
Suspension Seat (If Equipped) Fan Speed Control (31)
Fan Speed Control Air Conditioner Control (32)
Air Conditioner Control (If Equipped) Machine Security System (If Equipped)
This machine is equipped with a Caterpillar Machine Security System (MSS) and may not start under certain conditions. Read the following information and know your machine's settings. Your Caterpillar Dealer can identify your machine settings.
Machine Security System (MSS) - Machines that are equipped with a Caterpillar Machine Security System (MSS) can be identified by a decal in the operator station. MSS is designed to prevent theft of the machine or unauthorized operation. Basic Operation
MSS may be programmed to read a standard Caterpillar key or an electronic key. The electronic key contains an electronic chip within the plastic housing for the key. Each key emits a unique signal to the MSS. The keys can be identified by a gray housing or a yellow housing. MSS can have programmed settings to require an electronic key or a standard Caterpillar key for starting during certain periods of time.When the key start switch of the machine is turned to the ON position, the ECM will read the unique ID that is stored in the electronic key. The ECM will then compare this ID to the list of authorized keys. The following table tells the operator the status for starting the machine. The status light is located near the key start switch.
Table 1
Green light     The machine will start.    
Red light     The key is not