PUMP GP-GEAR 9J0809 - Caterpillar

Illustration 1 g03858039
Table 1
Specification for 137-8142 Front Housing Gp
Item Qty Part Specification Description
1 14 - Tighten bolts to 47 9 N m (35 7 lb ft) .
2 8 - Tighten bolts to 105 20 N m (77 15 lb ft) .
3 - - Apply a layer of sealant between the cylinder block, the front housing, and the oil pan in order to fill the space.
Illustration 2 g03858040
Table 2
Item Qty Part Specification Description
4 2 265-9033 Speed Sensor Gp Before assembly, lubricate the O-ring of speed sensor group lightly with clean engine oil.
Torque to 40 5 N m (30 4 lb ft).
5 1 166-9145 Cylinder Block Gasket During assembly, the rear face of the housing and the front face of the cylinder block must be free of oil, fuel, water, dirt, assembly compounds, and any other contaminants.
After assembly, trim the gasket and flush the gasket with the face of the housing.