9T6713 PUMP GP-PISTON Caterpillar parts
215C
Rating:
Alternative (cross code) number:
CA9T6713
9T-6713
9T6713
CA9T6713
9T-6713
9T6713
Weight: 267 pounds 121 kg.
EXCAVATOR,
You can buy:
Compatible equipment models: 9T6713:
For full view, you need register
Caterpillar SIS machinery equipment:
Information:
Table 4
Tools Needed For Pins with a Diameter of 120 mm (4.7 inch)
Qty Part Number Description
1 173-6745 Installer Ring
1 173-6746 Plunger
Illustration 1 g00363278
Installer Ring
Illustration 2 g00363455
Plunger
Illustration 3 g00680803
(1) Compression ring. (2) Seal. (3) Installer ring. (4) Installer ring with seal and compression ring.
Note: It is important to follow the correct procedure for installing maintenance free linkage seals. Many seal failures are the direct result of mistakes during the assembly and during the installation of the seal components.
Use the correct tooling to assemble seal (2) and compression ring (1).
Illustration 4 g00338312
Install seal (2) into installer ring (3).Note: The lip of seal (2) should be facing downward onto installer ring (3). See Illustration 3.
Submerge compression ring (1) in oil. Use 8T-9582 SAE 80W90Oil to lubricate the assembly.
Illustration 5 g00363457
Install compression ring (1) on seal (2) that is located in installer ring (3).Note: The compression ring (1) cannot be inserted upside-down. Resistance will be encountered if the compression ring is installed upside-down.
Illustration 6 g00338472
Installer ring with seal and compression ring
Illustration 7 g00337372Note: The maintenance free linkage seal will remain in the installer ring when the seal assembly is assembled correctly.
Position the installer ring and seal (4) over plunger (5).
Illustration 8 g00338532
Correct assembly of installer ring and plunger (6).
Illustration 9 g00337414
Insert the installer ring and plunger (6) into the bore of collar (7). The fit will be loose as the plunger acts as a guide to ensure proper alignment.
Illustration 10 g00681919
Evenly apply pressure around the edges of plunger (5) until the seal is inserted into the groove of collar (7).
Remove the installer ring and plunger (6) from collar (7).
Illustration 11 g01044342
Correct seal assembly installation in collar (7).
Illustration 12 g01044219
Section A of Illustration 11
(1) Compression ring. (2) Seal. (7) Collar.
Note: A properly installed seal will remain in the seal groove of the collar.
Repeat this procedure for any other Maintenance Free Linkage Seals.
Parts pump Caterpillar catalog:
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235, 235B, 235C, 235D, ...
120B, 140B, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235, 235B, 235C, 3126, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 350, 515, 517, 525, 527, 561D, 571G, 572G, 627B, 627E, 627F, 637D,...
9T3712
PUMP GP-DOUBLE-PISTON
215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 231D
215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 231D
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235, 235B, 235C, 235D, 330, ...
9J7902
PUMP GP-AUXILIARY GEAR
215, 215B, 215C, 225, 229, 235, 330 L
215, 215B, 215C, 225, 229, 235, 330 L
2W4160
PUMP GP-FUEL TRANSFER & MTG
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235, 235B, 235C, 235D, ...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235, 235B, 235C, 235D, ...
9J7901
PUMP GP-GEAR
215, 215B, 215C, 225, 229, 235
215, 215B, 215C, 225, 229, 235
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235, 235B, 235C, 235D, ...
120G, 12G, 130G, 140G, 143H, 14G, 160G, 160H, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235, 235B, 3204, 3304, 3304B, 3306, 3306B, 508, 515, 518, 518C, 525, 527, 528, 571G, 572G, 615, 615C, 6...
120G, 12G, 130G, 140G, 14G, 160G, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235, 235B, 235C, 3304, 3304B, 3306, 3306B, 518, 528, 561D, 571G, 572G, 615, 615C, 621E, 621R, 627B, 627E, 637D, 637E, 65...
120B, 140B, 215C, 215D, 219D, 225D, 229, 229D, 235, 235B, 235C, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 350, 515, 525, 527, 561D, 571G, 572G, 627B, 627E, 627F, 637D, 637E, 639D, 65, 65C, 70C, ...
120M, 120M 2, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235B, 235C, 235D, 245, 245B, 245D, 311B, 311D LRR, 312, 312B L, 312C L, 312D, 312D L, ...
3G9185
PUMP GP-PISTON
611, 615, 615C
611, 615, 615C
1620325
PUMP GP-PISTON
D7R II
D7R II
2742350
PUMP & MTG GP-BRAKE
854K, 992K
854K, 992K
1455102
PUMP
312, 312B L, 315B L
312, 312B L, 315B L
2408297
PUMP GP-FUEL TRANSFER
3612, 3616, C280-12, C280-16
3612, 3616, C280-12, C280-16
D10N, D9L, D9N
1N4558
PUMP GP-WATER
3412, G3412
3412, G3412
2288093
PUMP GP-FUEL TRANSFER
365C, 365C L, 365C L MH
365C, 365C L, 365C L MH