PUMP GP-AUXILIARY 9Y1304 - Caterpillar

Illustration 1 g03247263
Joystick thrust capabilities
(1) Ahead
(2) Starboard
(3) Astern
(4) Port Rotation is achieved by twisting the joystick handle. Joystick operation allows precise positioning of the vessel.
The joystick automatically returns to the center position when released, and all thrust commands cease.
Moving the joystick, including rotating the handle, engages the appropriate proportional solenoid valves to provide thrust in the selected direction using thrusters and conventional drives.
Illustration 2 g03247265
Joystick user interface
(5) Joystick handle
(6) Station select button
(7) LEDs
Joystick Handle (5): Provides for the application of thrust and direction control.
Station Select button (6): Activates/deactivates the joystick station and provides other joystick interface functionality.
LEDs (7): These LEDs provide system status.
Table 1
LED Flash
LED State Meaning
LEDs flash at about five flashes a second Station activation or deactivation attempted when Station Select button is released.
Solid off Station is inactive.
Solid on Station is the active station.
LEDs flash at about ten flashes per second Station calibration. Attempted when Station Select button is pressed.
LEDs flash a numeric flash code pattern Refer to the Troubleshooting Guide for more information on fault codes. Note: If you cannot take command of a station or the system does not respond to your commands, check the LEDs to see if an error has occurred.
Light Sensor: The light sensor senses the ambient light level to adjust the brightness of the LEDs automatically .