PUMP GP-ENGINE OIL 9Y3791 - Caterpillar

Typical Example1. Remove head shield (1) and the spacers.
Typical Example2. Loosen nuts (3). Lift the rear of exhaust manifold (2). Slide the exhaust manifold back and up to remove. Remove the exhaust manifold gaskets.Install Exhaust Manifold
Typical Example1. Install gaskets (2) on the exhaust manifold studs. Put 5P3931 Anti-Seize Compound on the threads of the exhaust manifold studs.2. Install exhaust manifold (1). Tighten nuts (3) to a torque of 45 4 N m (35 3 lb. ft.).
Typical Example3. Put the spacers and heat shield (4) in position and install washers and nuts (5). Tighten nuts (5) to a torque of 43 7 N m (32 5 lb. ft.).END BY:a. install fuel injection linesb. install turbocharger