PUMP GP-ENGINE OIL 9Y7607 - Caterpillar

Personal injury or death can occur from not following the proper procedure or the recommended tooling.To prevent the possibility of injury or death, follow the established procedure using the recommended tooling.
The air starting motor's system includes a strainer and a lubricator.Note: The air starting motor's system is under pressure. Be sure to purge the air pressure before performing service work.
Illustration 1 g00604357
(1) Strainer.
Typical example
Periodically, remove strainer (1) and thoroughly clean the strainer. After the strainer has been installed, ensure that the oil plug is tight.
Illustration 2 g00604358
(2) Air line lubricator.(typical example)
Always use air line lubricator (2) with the air starting motors.For temperatures above 0 °C (32 °F), use a SAE 10W nondetergent oil of high quality.For temperatures below 0 °C (32 °F), use air tool oil.To maintain the efficiency of the starting motor, flush the starting motor at regular intervals. Pour approximately 0.5 L (0.53 qt) of diesel fuel into the air inlet of the starting motor and operate the starting motor. This procedure will remove the dirt, the water and the mixture of oil from the air starting motor.