PUSH ARM GP 1154472 - Caterpillar

Illustration 10 g01332628
Install O-ring seals (21), backup ring (22), and screen (23) onto cartridge assembly (20) .
Illustration 11 g01332622
Install cartridge assembly (20). Tighten cartridge assembly (20) to a torque of 30 3 N m (22 2 lb ft).
Illustration 12 g01332621
Install O-ring seals (19) onto coil assembly (17) .
Illustration 13 g01332620
Install coil assembly (17) and nut (18). Tighten nut (18) to a torque of 3.4 0.4 N m (30.1 3.5 lb in).
Illustration 14 g01332609
Install O-ring seals (16) onto solenoid (15) .
Illustration 15 g01332430
Install solenoid (15), retainer (14), and bolt (13). Tighten bolt (13) to a torque of 28 7 N m (21 5 lb ft).
Illustration 16 g01332426
Illustration 17 g01332423
Install O-ring seals (12) onto cartridge assemblies (11) .
Install cartridge assemblies (11). Tighten cartridge assemblies (11) to a torque of 40 5 N m (30 4 lb ft).
Illustration 18 g01332421
Install coil assemblies (10) and nuts (9). Tighten nuts (9) to a torque of 13 1.5 N m (115 13 lb in).
Illustration 19 g01332411
Install O-ring seals (8) onto solenoid (5) .
Illustration 20 g01332409
Install solenoid (5), retainer (6), and bolt (7). Tighten bolt (7) to a torque of 28 7 N m (21 5 lb ft).
Illustration 21 g01332400
Install O-ring seals (4) onto cartridge assemblies (3) .
Illustration 22 g01332399
Install cartridge assembly (3) and nuts (2) .Note: Nuts (2) are being installed temporarily in order to prevent the nuts from being lost. The coil assemblies will not be installed until the control valve is installed into the machine.
Illustration 23 g01332398
Install hose (1) .End By: Install the control valve. Refer to Disassembly and Assembly, "Control Valve (Work Tool) - Install".