PUSH ARM GP-RH 3G5723 - Caterpillar

Removal Procedure
Start By:
Remove the valve mechanism cover. Refer to the Disassembly and Assembly, "Valve Mechanisim Cover - Remove and Install". Note: DO NOT disassemble the variable valve actuator after the component has been removed. Any attempt to disassemble the variable valve actuator will void the warranty of the component.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01261947
Remove engine oil connector (1). Remove the O-ring seals from the engine oil connector.
Disconnect harness assembly (2). Disconnect harness assemblies (3).
Illustration 2 g01261951
Remove nuts (4). Remove bolt (5). Remove nuts (6).
Remove valve actuator (7).