PUSH ARM AS 4T6733 - Caterpillar

4T6733 PUSH ARM AS Caterpillar parts D6H, D6R

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4T6733
4T-6733
4T6733

Weight: 1005 pounds 455 kg.

Buy PUSH ARM AS 4T6733 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 4T6733:

TRACK-TYPE TRACTOR D6H D6R Caterpillar

Number on catalog scheme: 3

Caterpillar 4T6733 Parts scheme PUSH ARM AS

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

D6H D6H LGP Series II Track-Type Tractors 5HF04000-UP (MACHINE) POWERED BY 3306 Engine

6Y-0948: PUSH ARM GP » (RH) SEBP19160610
6Y-0948: PUSH ARM GP » (RH) SEBP19160611

D6R Track-Type Tractor 8LN00001-UP (MACHINE) POWERED BY 3306 Engine

6Y-0948: PUSH ARM GP » (RH) SEBP26180476
6Y-0948: PUSH ARM GP » (RH) SEBP26180477

D6R Track-Type Tractor 9PN00001-UP (MACHINE) POWERED BY 3306 Engine

6Y-0948: PUSH ARM GP » (RH) SEBP26190486
6Y-0948: PUSH ARM GP » (RH) SEBP26190487

D6R LGP Track-Type Tractor 8TM00001-UP (MACHINE) POWERED BY 3306 Engine

6Y-0948: PUSH ARM GP » (RH) SEBP26340430
6Y-0948: PUSH ARM GP » (RH) SEBP26340431

D6R Track-Type Tractor LGP 4HN00001-UP (MACHINE) POWERED BY 3306 Engine

6Y-0948: PUSH ARM GP » (RH) SEBP26380424
6Y-0948: PUSH ARM GP » (RH) SEBP26380425

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1 Start By:
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01135236
Remove bolts (3) and thrust plate (4).
Remove balancer gear (5) from gear shaft (2).
Use Tooling (A) and a suitable press to remove sleeve bearing (6) from balancer gear (5).
Remove bolts (1) and gear shaft (2) from the front of the cylinder block. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01135236
Use Tooling (A) and a suitable press to install sleeve bearing (6) in balancer gear (5). Note: Sleeve bearing (6) must be machined to the correct inside diameter. Refer to Special Instructions, SEHS9282, "Machining of Replacement Sleeve Bearings".
Install gear shaft (2) and bolts (1). Tighten bolts (1) to a torque of 140 10 N m (103 7 lb ft).
Apply clean engine oil on the sleeve bearing in balancer gear (5) and gear shaft (2). Install balancer gear (5) on gear shaft (2). Make sure that the marks on balancer gear (5) and the crankshaft gear are in alignment with the rotation of the engine. Install thrust plate (4) and bolts (3). End By:
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".