PUSHROD AS 5117022 - Caterpillar

5117022 PUSHROD AS Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5117022
511-7022
5117022

Weight: 2 pounds 0 kg.

Buy PUSHROD AS 5117022 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

MyTractor Muffler Kit Contains fits Allis Chalmers 5040, 5045, 5050 5011633, 5011657, 4980843, 5011631, 5085165, 5117022

$69.06

12 May 2024

US: MyTractorsparts

MyTractor Muffler Kit Contains fits Allis Chalmers 5040, 5045, 5050 5011633, 5011657, 4980843, 5011631, 5085165, 5117022
MyTractor 5040, 5045, 5050 || Quality Part by MyTractor || Compatible With Allis Chalmers || 5011633, 5011657, 4980843, 5011631, 5085165, 5117022

Number on catalog scheme: 5

Caterpillar 5117022 Parts scheme PUSHROD AS

For full view, you need register

Information:

Disassembly Procedure
Start By:
Remove the fuel filter housings.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The fuel filter housing can be assembled for either right-hand service or left-hand service. Mark the location of the valve housing and the filter housing before disassembly.
Illustration 1 g03747907
Remove tube assembly (1) and check valves (2) if the engine is equipped with check valves.
Remove tube assembly (3). Note: Tube assembly (3) is not used on some engine arrangements.
Remove check valves (4).
Remove bolt (5) and disconnect shaft assembly (7) from the valve.
Remove the bolts that hold housing (6) in place on the fuel filter housing and remove the fuel filter housing.
Illustration 2 g03747909
Illustration 3 g03747911
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove O-ring seals (16) and (18).
Remove plug (13), spring (11), and ball (10). Remove O-ring seal (12) from the plug.
Remove plug (8) from housing (6). Remove O-ring seal (9) from the plug.
Remove valve (17) from housing (6).
Remove cover (14) and O-ring seal (15) from housing (6).