PUSHROD AS 5286881 - Caterpillar

Illustration 1 g03334917
Right side view
Table 1
Specification for 282-4576 Blade and Mounting Gp, 282-4579 Blade and Mounting Gp, and 282-4582 Blade and Mounting Gp
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the frame, the bushing, and the cylinder pin bores.
1 6 151-9707 Pin As Diameter is 59.86 0.03 mm (2.357 0.001 inch).
2 As required, use the following shims in order to adjust the maximum lateral clearance to 1.6 mm (0.06 inch).
12 093-0065 Shim Thickness is 1.0 mm (0.04 inch).
6 099-7091 Shim Thickness is 1.5 mm (0.06 inch).
6 093-0097 Shim Thickness is 2.0 mm (0.08 inch).
3 2 273-6945 Bushing Bore before assembly is 60.15 0.04 mm (2.368 0.002 inch).
Installation depth is 10.0 0.8 mm (0.39 0.03 inch).
4 6 8T-4179 Bolt Torque to 70 15 N m (52 11 lb ft).
5 4 166-1492 Lip Type Seal Lubricate the sealing lip of four lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install four lip type seals so that the lip type seals do not extend beyond the face of the boss.