AVSPARE.COM
parts catalog

QUICK COUPLER 1048499 - Caterpillar


1048499 QUICK COUPLER Caterpillar parts
Rating:
61
Alternative (cross code) number:
CA1048499
104-8499
1048499
Caterpillar 1048499 QUICK COUPLER

Buy QUICK COUPLER 1048499 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g06161729If the hammer is not used for extended periods of time, the hammer should be stored upright. Refer to Illustration 1. When the hammer is stored in the upright position, secure the hammer properly in order to prevent the hammer from tipping or falling.
Illustration 2 g06161730Note: Do not store the hammer horizontally on the ground for periods of time that is longer than 6 months. Storing the hammer horizontally may damage the piston seals. If the seals are damaged, the hydraulic oil will leak from the seals of the hammer.Install caps over the hydraulic fittings in order to keep dirt out of the fittings. New grease should be applied into the lower tool bushing and the upper tool bushing. The tool retaining pins should be cleaned and the tool retaining pins should be lubricated.Refer to the Special Instruction, SEHS9031, "Storage Procedure for Caterpillar Products" for information on the storage of the hammer.


Parts quick Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.