RACE 0052335 - Caterpillar

TYPE="1" START="1">
Park on a level surface. If you must park on a grade, block the machine.
Apply the service brake in order to stop the machine. Move the speed range selector to the NEUTRAL position. Use the throttle dial to reduce the engine speed to low idle. Engage the parking brake.
Lower all implements to the ground.
Stop the engine by turning the engine start switch key to the OFF position. Remove the key.
Turn the key for the battery disconnect switch to the OFF position. Remove the key when you exit the machine for an extended period.
When you dismount, use the steps and the handholds. Use both hands and face the machine.
Inspect the engine compartment for debris. Clean out any debris and paper in order to avoid a fire.
Install all the vandalism protection covers and install the locks where equipped. Padlocks are factory installed for the following areas:
Master Switch Locking Cover
Fuel Drain
Lock the cab doors and the windows, if equipped.