RACE 0687220 - Caterpillar

Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g03406401
Install a suitable lifting device to STIC steering control valve (12). The weight of STIC steering control valve (12) is approximately 9 kg (20 lb).
Position steering control valve (12). Install four bolts (11).
Illustration 2 g03406392
Install tee assembly (6).
Connect hose assemblies (3), (4) (not shown), (5), (7), (8), (9) and (10).
Illustration 3 g03406389
Connect hose assemblies (1) and (2).
Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check". End By:
Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".