1P0622 RACE AND ROLLER ASSEM. (inner) Caterpillar parts
572G, D7F, D7G, D7G2
Rating:
Alternative (cross code) number:
CA1P0622
1P-0622
1P0622
CA1P0622
1P-0622
1P0622
Weight: 4 pounds 1 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1P0622 Bearing (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 4.62 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 4.62 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1P0622 Bearing (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 4.62 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 4.62 lbs || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
None
For full view, you need register
Information:
Use this procedure to troubleshoot a problem with a sensor. Also, use this procedure if one of the following diagnostic codes is active or easily repeated.
Table 1
J1939 Code and Description Comments
8156-3
Well Stimulation Pump Gear Box Oil Pressure : Voltage Above Normal The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
8156-4
Well Stimulation Pump Gear Box Oil Pressure : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8157-3
Well Stimulation Pump Gear Box Oil Temperature : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8157-4
Well Stimulation Pump Gear Box Oil Temperature : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8640-2
Well Stimulation Pump Vibration 1 : Erratic, Intermittent, or Incorrect The ECM detected that the vibration sensor is failed.
8640-3
Well Stimulation Pump Vibration 1 : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8640-4
Well Stimulation Pump Vibration 1 : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8641-2
Well Stimulation Pump Vibration 2 : Erratic, Intermittent, or Incorrect The ECM detected that the vibration sensor is failed.
8641-3
Well Stimulation Pump Vibration 2 : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8641-4
Well Stimulation Pump Vibration 2 : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8642-2
Well Stimulation Pump Vibration 3 : Erratic, Intermittent, or Incorrect The ECM detected that the vibration sensor is failed.
8642-3
Well Stimulation Pump Vibration 3 : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8642-4
Well Stimulation Pump Vibration 3 : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged. Diagnostics on the Cat® Electronic Technician (ET)Wiggle Test - The Wiggle Test allows you to monitor the status of the signals from the sensors.For additional information regarding the Wiggle Test, refer to the documentation that accompanies the Cat ET software.
Table 2
Troubleshooting Test Steps Values Results
1. Check for Codes
A. Connect Cat® Electronic Technician (ET) to the service tool connector.
B. Determine if a code is active or logged.
Codes
Result: A -2 code is active.
Proceed to Test Step 6.
Result: A -3 code is active.
Proceed to Test Step 3.
Result: A -4 code is active.
Proceed to Test Step 2.
2. Create a Short at the Sensor Connector
A. Turn the
Table 1
J1939 Code and Description Comments
8156-3
Well Stimulation Pump Gear Box Oil Pressure : Voltage Above Normal The Electronic Control Module (ECM) detects signal voltage that is not in the acceptable range.
The code is logged.
8156-4
Well Stimulation Pump Gear Box Oil Pressure : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8157-3
Well Stimulation Pump Gear Box Oil Temperature : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8157-4
Well Stimulation Pump Gear Box Oil Temperature : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8640-2
Well Stimulation Pump Vibration 1 : Erratic, Intermittent, or Incorrect The ECM detected that the vibration sensor is failed.
8640-3
Well Stimulation Pump Vibration 1 : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8640-4
Well Stimulation Pump Vibration 1 : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8641-2
Well Stimulation Pump Vibration 2 : Erratic, Intermittent, or Incorrect The ECM detected that the vibration sensor is failed.
8641-3
Well Stimulation Pump Vibration 2 : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8641-4
Well Stimulation Pump Vibration 2 : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8642-2
Well Stimulation Pump Vibration 3 : Erratic, Intermittent, or Incorrect The ECM detected that the vibration sensor is failed.
8642-3
Well Stimulation Pump Vibration 3 : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
8642-4
Well Stimulation Pump Vibration 3 : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged. Diagnostics on the Cat® Electronic Technician (ET)Wiggle Test - The Wiggle Test allows you to monitor the status of the signals from the sensors.For additional information regarding the Wiggle Test, refer to the documentation that accompanies the Cat ET software.
Table 2
Troubleshooting Test Steps Values Results
1. Check for Codes
A. Connect Cat® Electronic Technician (ET) to the service tool connector.
B. Determine if a code is active or logged.
Codes
Result: A -2 code is active.
Proceed to Test Step 6.
Result: A -3 code is active.
Proceed to Test Step 3.
Result: A -4 code is active.
Proceed to Test Step 2.
2. Create a Short at the Sensor Connector
A. Turn the
Caterpillar parts catalog:
Parts race Caterpillar catalog:
128, 129, 518, 572G, 583K, D4D, D4E, D4E SR, D6C, D9H
572G, 583H, 583K, D4D, D4E, D4E SR, D6C, D9H
128, 129, 571G, 572G, 583H, 583K, 589, 594, 594H, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D6C, D8H, D8K, D8L, D9G, D9H, D9L, D9R
57, 578, 58, 594H, D10N, D10R, D6H, D6H II, D6H XL, D6H XR, D7G, D7H, D7R, D8L, D8N, D8R, D9H, D9L, D9N
572G, 941, 951B, D4D, D4E, D4E SR, D7F, D7G, D7G2
572G, D6C, D6D, D6E, D6G, D6G2 LGP, D6G2 XL, D7F, D7G, D7G2
533, 543, 953C, 963C, 966K, 966M XE, 972M XE, 973C, 983, D7F, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
572G, 583H, 583K, 594, 594H, D8H, D8K, D9G, D9H
572G, D7F, D7G, D7G2
572G, D7F, D7G, D7G2
572G, D7F, D7G, D7G2
5P3754
RACE
D5, D5B
D5, D5B
583K, D8H, D8K
583K, D8H, D8K
583K, D8H, D8K
583K, 777, D8H, D8K
2K1730
RACE
572G, 594, 594H
572G, 594, 594H
5P0583
RACE & ROLLER ASSEM.
528, 54, D4E
528, 54, D4E
5P6680
RACE
528, 54, D4E
528, 54, D4E
4S7244
RACE
D9H
D9H
118, 119, 227, 30, D9H
572G, D7F, D7G, D7G2