2F5959 RACE (INNER) Caterpillar parts
120B, 12E, 12F, 140, 140B, 14E, 621, 621B, 623B, 627B, D337, D342
Rating:
Alternative (cross code) number:
CA2F5959
2F-5959
2F5959
CA2F5959
2F-5959
2F5959
Weight: 0.80 pounds 0 kg.
MARINE ENGINE, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 2F5959 Race Bearing for Heavy Equipment
CTP Race Bearing Only || Sold in each || Easy in-and-out fit
CTP Race Bearing Only || Sold in each || Easy in-and-out fit
CTP 2F5959 Race Bearing for Heavy Equipment
CTP Race Bearing Only || Sold in each || Easy in-and-out fit
CTP Race Bearing Only || Sold in each || Easy in-and-out fit
Compatible equipment models: 2F5959:
Information:
Use this procedure if the digital throttle position sensor is suspected of incorrect operation. This procedure also covers the following diagnostic codes:
Table 1
Diagnostic Trouble Codes for the Digital Throttles
J1939 Code CDL Code Code Description
(code descriptions may vary) Comments
29-3 774-3 Accelerator Pedal Position 2 : Voltage Above Normal The Electronic Control Module (ECM) detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the upper diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
29-4 774-4 Accelerator Pedal Position 2 : Voltage Below Normal The ECM detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the lower diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
29-8 774-8 Accelerator Pedal Position 2 : Abnormal Frequency, Pulse Width or Period The ECM detects the following conditions:
The signal frequency from the digital throttle position sensor is equal to 0% or 100% for more than 2 seconds.
The ECM has been powered for at least 3 seconds.
Diagnostic codes 29-3, 774-3, 29-4, and 774-4 are not active.
There are no active 678 or 41 codes.
The ECM sets the Throttle Position to "0%".
If equipped, the warning lamp will come on. The diagnostic code will be logged if the engine is running. The diagnostic code will not be logged if the engine is cranking.
91-3 91-3 Accelerator Pedal Position 1 : Voltage Above Normal The Electronic Control Module (ECM) detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the upper diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
91-4 91-4 Accelerator Pedal Position 1 : Voltage Below Normal The ECM detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the lower diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
91-8 91-8 Accelerator Pedal Position 1 : Abnormal Frequency, Pulse Width or Period The ECM detects the following conditions:
The signal frequency from the digital throttle position sensor is equal to 0% or 100% for more than 2 seconds.
The ECM has been powered for at least 3 seconds.
Diagnostic codes 91-3 and 91-4 are not active.
There are no active 678 or 41 codes.
The ECM sets the Throttle Position to "0%".
If equipped, the warning lamp will come on. The diagnostic code will be logged if the engine is running. The diagnostic code will not be logged if the engine is cranking.
Follow the troubleshooting procedure to identify the root cause of the fault. If a fault occurs with the primary throttle, the engine will
Table 1
Diagnostic Trouble Codes for the Digital Throttles
J1939 Code CDL Code Code Description
(code descriptions may vary) Comments
29-3 774-3 Accelerator Pedal Position 2 : Voltage Above Normal The Electronic Control Module (ECM) detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the upper diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
29-4 774-4 Accelerator Pedal Position 2 : Voltage Below Normal The ECM detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the lower diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
29-8 774-8 Accelerator Pedal Position 2 : Abnormal Frequency, Pulse Width or Period The ECM detects the following conditions:
The signal frequency from the digital throttle position sensor is equal to 0% or 100% for more than 2 seconds.
The ECM has been powered for at least 3 seconds.
Diagnostic codes 29-3, 774-3, 29-4, and 774-4 are not active.
There are no active 678 or 41 codes.
The ECM sets the Throttle Position to "0%".
If equipped, the warning lamp will come on. The diagnostic code will be logged if the engine is running. The diagnostic code will not be logged if the engine is cranking.
91-3 91-3 Accelerator Pedal Position 1 : Voltage Above Normal The Electronic Control Module (ECM) detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the upper diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
91-4 91-4 Accelerator Pedal Position 1 : Voltage Below Normal The ECM detects the following conditions:
The ECM has been powered for 3 seconds.
Diagnostic code 168-4 is not active.
There are no active 678 or 41 codes.
The setting for the lower diagnostic limit has been exceeded for one second.
If equipped, the warning lamp will come on. The diagnostic code will be logged.
91-8 91-8 Accelerator Pedal Position 1 : Abnormal Frequency, Pulse Width or Period The ECM detects the following conditions:
The signal frequency from the digital throttle position sensor is equal to 0% or 100% for more than 2 seconds.
The ECM has been powered for at least 3 seconds.
Diagnostic codes 91-3 and 91-4 are not active.
There are no active 678 or 41 codes.
The ECM sets the Throttle Position to "0%".
If equipped, the warning lamp will come on. The diagnostic code will be logged if the engine is running. The diagnostic code will not be logged if the engine is cranking.
Follow the troubleshooting procedure to identify the root cause of the fault. If a fault occurs with the primary throttle, the engine will
Cat SIS web machinery list:
Parts race Caterpillar catalog:
1T0686
RACE-THRUST BEARING
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633D, 633E II, 637, 637D, 637E, 637G, 6...
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633D, 633E II, 637, 637D, 637E, 637G, 6...
1T0762
RACE-THRUST BEARING
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633D, 633E II, 637, 637D, 637E, 637G, 6...
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633D, 633E II, 637, 637D, 637E, 637G, 6...
7D1677
RACE-BEARING-INNER
12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 572R, 572R II, 578, 583R, 583T, 587R, 587T, 589, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623B, ...
12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 572R, 572R II, 578, 583R, 583T, 587R, 587T, 589, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623B, ...
2H3525
RACE-SPECIAL ROLLER BEARING
120B, 12E, 140B, 14E, 561B, 561C, 955C, 977D, D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D6E SR, D7F, D7G
120B, 12E, 140B, 14E, 561B, 561C, 955C, 977D, D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D6E SR, D7F, D7G
2H3517
RACE & ROLLER AS-INNER
120B, 12E, 140B, 14E, 16, 518, 518C, 528, 528B, 530B, 561B, 561C, 657, 666, 768B, 769, 772, 773, 920, 930, 941, 951B, 955C, 977D, D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D6E SR, D7F, D7G, D9R, D9T
120B, 12E, 140B, 14E, 16, 518, 518C, 528, 528B, 530B, 561B, 561C, 657, 666, 768B, 769, 772, 773, 920, 930, 941, 951B, 955C, 977D, D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D6E SR, D7F, D7G, D9R, D9T
2D6420
RACE-ROLLER BEARING
120B, 12E, 12F, 140, 140B, 14E, 508, 518, 527, 561B, 561C, 931B, 977D, D4D, D4E, D4E SR, D5, D5B, D5C, D5E, D5HTSK II
120B, 12E, 12F, 140, 140B, 14E, 508, 518, 527, 561B, 561C, 931B, 977D, D4D, D4E, D4E SR, D5, D5B, D5C, D5E, D5HTSK II
7D1188
RACE-THRUST BEARING
14E, 508, PR-450C
14E, 508, PR-450C
6D0723
RACE AND ROLLER ASSEM. (outer)
12F, 140, 140B, 14E, D10, D11N
12F, 140, 140B, 14E, D10, D11N
6D0722
RACE (inner)
12F, 140, 140B, 14E, D10, D11N
12F, 140, 140B, 14E, D10, D11N
9H9848
RACE (OUTER)
12E, 12F, 14E
12E, 12F, 14E
3B8972
RACE (OUTER)
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
2D6418
RACE (OUTER)
120B, 12E
120B, 12E
8F6483
RACE & ROLLER ASSEM.
D364, D375D
D364, D375D
8F2019
RACE & ROLLER ASSEM
D364, D375D
D364, D375D
3P2564
RACE
7231, 7241, D10, D11N, D11R, D11T
7231, 7241, D10, D11N, D11R, D11T
1M1604
RACE (inner)
16, 561D, 583H, 583K, 7231, 955H, 955K, D5, D5B, D8H, D8K
16, 561D, 583H, 583K, 7231, 955H, 955K, D5, D5B, D8H, D8K
2D6421
RACE AND ROLLER ASSEM. outer
12E, 16, 561D, 583H, 583K, 7231, 955H, 955K, D5, D5B, D8H, D8K
12E, 16, 561D, 583H, 583K, 7231, 955H, 955K, D5, D5B, D8H, D8K
9J0114
RACE-THRUST
16G, 245, 3406B, 578, 613, 613C, 613C II, 621E, 623E, 627E, 824C, 826C, 980C, SS-250
16G, 245, 3406B, 578, 613, 613C, 613C II, 621E, 623E, 627E, 824C, 826C, 980C, SS-250
1M5514
RACE-ROLLER BEARING
16, 651, 657, 657B, 7211, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 769, 772, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 824B...
16, 651, 657, 657B, 7211, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 769, 772, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 824B...
0057310
RACE
508, 7211, D10N, D10R, D10T
508, 7211, D10N, D10R, D10T
1M8398
RACE-ROLLER BEARING
7211, 7221
7211, 7221
8F5285
RACE (INNER)
D364
D364