3S8055 RACE AND ROLLER ASSEM. Caterpillar parts
980, 980B
Rating:
Alternative (cross code) number:
CA3S8055
3S-8055
3S8055
CA3S8055
3S-8055
3S8055
Weight: 0.60 pounds 0 kg.
WHEEL LOADER,
Related part:
3S8055
BEARING-RLR-YM
4337506
CL
Number on catalog scheme:
14
For full view, you need register
Information:
The following procedure is for the following machines.
CB-214C (S/N: 9XK1-UP)
CB-214D (S/N: 1TZ1-1121)
CB-224C (S/N: 3AL1-UP)
CB-224D (S/N: 8RZ1-2065)
CB-225D (S/N: 9FZ1-468)The following parts are needed for this procedure for the machines above.
Table 2
Parts List
Qty Part Number Description
1 250-6645 harness
1 106-8704 Arc Suppressor (Diode)
1 3E-3364 Receptacle As
2 8T-8729 Connector Pins
1 3E-3365 Receptacle Lock Wedge
1 168-7908 Magnetic Switch Gp (Relay)
1 1S-0994 Clip
1 8T-4138 Bolt
1 5P-4115 Hard Washer
Illustration 1 g01061519
(1) 106-8704 Arc Suppressor (2) 168-7908 Magnetic Switch Gp
Disconnect the battery and remove the battery.
Release the bracket that contains the relay.
Disconnect the existing relay and remove the existing relay.
Illustration 2 g01061520
(3) 70 mm (2.8 inch) (4) 25 mm (1 inch) (5) 65 mm (2.6 inch)
Drill two 7 mm (0.28 inch) holes in the bracket.
Cut the two wires just before the terminals.
308-YL
202-BK
Crimp two 8T-8729 Connector Pins on the wires and then install the wires into 3E-3364 Receptacle As .Note: Install 202-BK into location 2 and 308-YL into location 1 on the receptacle.
Connect the new harness on the receptacle and then connect to the diode.
Install the new relay on the support and then install the relay onto the machine.
Connect the relay to the two harness wires.
109-RD
112-PU
Install the battery and connect the battery terminals.The following procedure is for the following machines.
CB-334D (S/N: DCZ1-UP; 3JZ1-UP; 4CZ1-UP)
CB-335D (S/N: BBW1-UP; 5PZ1-UP)The following parts are needed for this procedure for the machines above.
Table 3
Parts List
Qty Part Number Description
1 250-6645 harness
1 106-8704 Arc Suppressor (Diode)
1 3E-3364 Receptacle As
2 8T-8729 Connector Pins
1 3E-3365 Receptacle Lock Wedge
1 168-7908 Magnetic Switch Gp (Relay)
1 1S-0994 Clip
1 8T-4138 Bolt
1 5P-4115 Hard Washer
Disconnect the terminals on the battery.
Drill one 7 mm (0.28 inch) hole 66 mm (2.6 inch) from the edge of the bracket.
Cut the two wires of the existing harness just before the terminals.
308-YL
200-BK
Crimp two 8T-8729 Connector Pins on the wires and then install the wires into 3E-3364 Receptacle As .Note: Install 200-BK into location 2 and 308-YL into location 1 on the receptacle.
Illustration 3 g01061523
(6) 168-7908 Magnetic Switch Gp (7) 106-8704 Arc Suppressor
Install the new relay (6) and install the new diode (7) onto the support.
Connect the relay onto the new harness with the following wires.
109-RD
112-PU
Connect the battery terminals.
CB-214C (S/N: 9XK1-UP)
CB-214D (S/N: 1TZ1-1121)
CB-224C (S/N: 3AL1-UP)
CB-224D (S/N: 8RZ1-2065)
CB-225D (S/N: 9FZ1-468)The following parts are needed for this procedure for the machines above.
Table 2
Parts List
Qty Part Number Description
1 250-6645 harness
1 106-8704 Arc Suppressor (Diode)
1 3E-3364 Receptacle As
2 8T-8729 Connector Pins
1 3E-3365 Receptacle Lock Wedge
1 168-7908 Magnetic Switch Gp (Relay)
1 1S-0994 Clip
1 8T-4138 Bolt
1 5P-4115 Hard Washer
Illustration 1 g01061519
(1) 106-8704 Arc Suppressor (2) 168-7908 Magnetic Switch Gp
Disconnect the battery and remove the battery.
Release the bracket that contains the relay.
Disconnect the existing relay and remove the existing relay.
Illustration 2 g01061520
(3) 70 mm (2.8 inch) (4) 25 mm (1 inch) (5) 65 mm (2.6 inch)
Drill two 7 mm (0.28 inch) holes in the bracket.
Cut the two wires just before the terminals.
308-YL
202-BK
Crimp two 8T-8729 Connector Pins on the wires and then install the wires into 3E-3364 Receptacle As .Note: Install 202-BK into location 2 and 308-YL into location 1 on the receptacle.
Connect the new harness on the receptacle and then connect to the diode.
Install the new relay on the support and then install the relay onto the machine.
Connect the relay to the two harness wires.
109-RD
112-PU
Install the battery and connect the battery terminals.The following procedure is for the following machines.
CB-334D (S/N: DCZ1-UP; 3JZ1-UP; 4CZ1-UP)
CB-335D (S/N: BBW1-UP; 5PZ1-UP)The following parts are needed for this procedure for the machines above.
Table 3
Parts List
Qty Part Number Description
1 250-6645 harness
1 106-8704 Arc Suppressor (Diode)
1 3E-3364 Receptacle As
2 8T-8729 Connector Pins
1 3E-3365 Receptacle Lock Wedge
1 168-7908 Magnetic Switch Gp (Relay)
1 1S-0994 Clip
1 8T-4138 Bolt
1 5P-4115 Hard Washer
Disconnect the terminals on the battery.
Drill one 7 mm (0.28 inch) hole 66 mm (2.6 inch) from the edge of the bracket.
Cut the two wires of the existing harness just before the terminals.
308-YL
200-BK
Crimp two 8T-8729 Connector Pins on the wires and then install the wires into 3E-3364 Receptacle As .Note: Install 200-BK into location 2 and 308-YL into location 1 on the receptacle.
Illustration 3 g01061523
(6) 168-7908 Magnetic Switch Gp (7) 106-8704 Arc Suppressor
Install the new relay (6) and install the new diode (7) onto the support.
Connect the relay onto the new harness with the following wires.
109-RD
112-PU
Connect the battery terminals.
Caterpillar parts catalog:
Parts race Caterpillar catalog:
5S6145
RACE-THRUST
561H, 561M, 561N, 572R, 572R II, 980B, AP-1000, AP-1000B, AP-1055B, BG-2455C, PL61, RM-350B, RM-500, SM-350
561H, 561M, 561N, 572R, 572R II, 980B, AP-1000, AP-1000B, AP-1055B, BG-2455C, PL61, RM-350B, RM-500, SM-350
10 FT, 10-20B, 10B, 1140, 1160, 120, 16, 1673, 1673B, 1673C, 1674, 1676, 1693, 16G, 215, 225, 245, 3160, 3304, 3306, 3406, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3508, 3508C, 3512, 3512B, 3516, 3516B...
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633D, 633E II, 637, 637D, 637E, 637G, 6...
621, 621B, 621E, 621F, 621G, 621H, 621K, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633D, 633E II, 637, 637D, 637E, 637G, 6...
574, 980, 980B, D9R, D9T
824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 977K, 977L, 980, 980B, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 983, 983B, 988, 988B, R1700 II, R1700G, R2900, R2900G
980, 980B
1688391
RACE-ROLLER
966M XE, 972M XE
966M XE, 972M XE
3616725
RACE-THRUST
525D, 535D, 545D, 555D, 966M, 972M
525D, 535D, 545D, 555D, 966M, 972M
2971706
RACE-THRUST
966M, 966M XE, 972M, 972M XE
966M, 966M XE, 972M, 972M XE
6Y9096
RACE & ROLLER AS-INNER
966K, 966M XE, 972M XE
966K, 966M XE, 972M XE
3524648
RACE-BEARING
966K, 966M XE, 972M XE
966K, 966M XE, 972M XE
966K, 966M XE, 972M XE
776C, 776D, 777, 777B, 777D, 784B, 785, 785B
5P4343
RACE-ROLLER BEARING
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ
6G6891
RACE
980F II
980F II
24H, 24M, 69D, 735, 735B, 740, 740B, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G LRC, 775G OEM, 988F II, ...
24H, 24M, 69D, 735, 735B, 740, 740B, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G LRC, 775G OEM, 988F II, ...
980, 980B