RACE-INNER 4H9018 - Caterpillar

Check that the lines attached to all the remote grease fittings are undamaged. If the grease lines are split, grease will not reach the components that require lubricating. Machine damage will result.
Install the steering frame locks. Refer to Operation and Maintenance Manual, "Steering Frame Lock".
Illustration 1 g00643377
Before you lubricate fittings (1) and (2) clean the fittings.
Lubricate the steering cylinder pins through four fittings. Lubrication fittings (1) and (2) are located on both sides of the machine.Note: If regular lubrication is carried out at the recommended intervals, only one or two shots of grease will be required at each fitting. If more than six shots of grease per fitting are required, the lines may be split or damaged, and grease will not reach the steering cylinder pins.
Remove the steering frame locks.