RACE-BEARING INNER 5M3472 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 350-4401 Adapter Plate 1
B 4-34614 Hoist Ring
Columbus McKinnon Corporation 2
C 1U-9200 Lever Puller Hoist 1
D 1U-5750 Engine Stand 1
1P-2850 Oil Drain Cart 1
E - Loctite 5127 -
Illustration 1 g02394382
Position gear pump (21) and install bolts (20). Tighten bolts (20) to a torque of 55 10 N m (40 7 lb ft).
Illustration 2 g02394401
Install O-ring seal (19).
Illustration 3 g02454082
Position housing (18) and install bolts (17). Tighten bolts (17) to a torque of 55 10 N m (40 7 lb ft).
Install tube assembly (16). Tighten tube assembly (16) to a torque of 42 2 N m (31 2 lb ft).
Install tube assembly (15). Tighten tube assembly (15) to a torque of 172.5 7.5 N m (127 6 lb ft).
Illustration 4 g02454081
Install seal (14).
Illustration 5 g02380297
Apply Tooling (E) onto surface (X) and surface (Y) of the transmission housing and the torque converter housing.
Illustration 6 g02454077
Position oil pan (13) and install bolts (12). Tighten bolts (12) to a torque of 55 10 N m (40 7 lb ft).
Illustration 7 g02454076
Install screen (11) and magnetic filter (10).
Illustration 8 g02454058
Install O-ring seal (9), cover (8), and bolts (7). Tighten bolts (7) to a torque of 28 7 N m (21 5 lb ft).
Illustration 9 g02454024
Illustration 10 g02453439
Illustration 11 g02454022
Attach Tooling (B), Tooling (C), and a suitable lifting device onto transmission and torque converter (6). The weight of transmission and torque converter (6) is approximately 544 kg (1200 lb).
Remove transmission and torque converter (6) from Tooling (D).