RACE-BEARING 7D3182 - Caterpillar

Type 1
Illustration 1 g00853131
(1) Cover Tighten the cover bolts evenly in small increases until the following torque is reached: ... 82 N m (60 lb ft) (2) Bolt Torque for bolts ... 38 N m (28 lb ft) (3) Bolt Torque for bolt ... 78 N m (57 lb ft) (4) Bolt Tighten the bolt that holds the pinion to the following torque. Right hand side mounted starters have a left hand threaded bolt. Left hand side mounted starters have a right hand threaded bolt: ... 109 N m (80 lb ft) (5) Rotor clamp nut Tighten the rotor clamp nut until the following clearance between the rear end plate and the rotor is reached: ... 0.03 to 0.08 mm (0.001 to 0.003 inch)Check the clearance again after the bolt for the rotor clamp nut is tightened. (6) Bolt Tighten the bolt that holds the rotor to the following torque: ... 122 N m (90 lb ft)Type 2
Illustration 2 g00853467
(1) Torque for bolts ... 34 N m (25 lb ft) (2) Torque for bolts ... 11 N m (8 lb ft)