RADIATOR GP 10R1039 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8T-3207     Lifting Bracket     1    
5P-8622 Shackle     1    
1A-8651 Bolt     2    
4K-0367 Full Nut     2    
5P-8248 Hard Washer     4    
B     1P-3533     Bar     1    
Illustration 1 g00951279
Install O-ring seal (7) and O-ring seal (8) .
Illustration 2 g00951278
Illustration 3 g00951276
Install Tooling (A) and a suitable lifting device to final drive (3) .Note: Use Tooling (B) in order to balance final drive, the steering clutch and brake (4) .
Position a protective cover over the side window.
Position final drive, the steering clutch and brake (4). The weight of the final drive, steering clutch, and brake is approximately 431 kg (950 lb).
Illustration 4 g00951277
Install bolts (6) .
Install bolts (5) .
Remove Tooling (A) .
Illustration 5 g00951275
Install bolts (2) .
Remove cover (1) .End By:
Install the axles. Refer to Disassembly and Assembly, "Axles - Remove and Install".
Connect the track. Refer to Disassembly and Assembly, "Track - Connect".