RADIATOR AS 1639795 - Caterpillar

Illustration 2 g03850826
Table 4
Optional Tools(1)
Tool Item Qty Part No Description
B B1 2 8T-0855 Pressure Gauges
(0 - 4000 kPa (0 - 580 psi))
B2 2 6V-4144 Quick Connect Couplers
C C1 2 6V-4142 Fittings
C2 2 177-7860 Hose As
C3 2 6V-4143 Quick Connect Couplers
(1) The optional tools can be used to replace the digital pressure gauges in the required tool list.
Connect each Tool (C) to each Tool (B).Test Preparation
Drive the machine to a smooth, horizontal surface.
Illustration 3 g06049382
Move propel lever (4) to the NEUTRAL position.
Press parking brake switch (3) to change the status of the parking brake to "engaged". When the parking brake status is "engaged", an LED next to the parking brake switch will be illuminated.
Use travel mode switch (2) to select the PAVE mode. When the travel mode switch is set to PAVE mode, an LED next to pave symbol (1) will be illuminated.Note: The machine must be in PAVE mode to operate the screed lift system, hopper system, apron system, and auger lift system.
Illustration 4 g06053856
Press left hopper lower switch (5) and right hopper lower switch (6). Fully lower the hoppers.
Illustration 5 g06053860
Use screed float switch (8) to place the screed in the FLOAT position. When the screed is in the FLOAT position, an LED next to the screed float switch will illuminate. Lower the screed to the ground.
Press rpm decrease switch (9) for the throttle control once to