RADIATOR & HYD OIL COOLER GP 1932766 - Caterpillar

2. Remove four bolts (1), and remove guard (2). If necessary, remove the four bolts (not shown) on the bottom of guard (4), and remove bottom guard (4). Also, remove the four bolts (7), and remove two supports (9).3. Remove six bolts (3), and remove auxiliary drive shaft (8). Remove three bolts (5) from each end of the drive shaft, and remove couplings (6). The following steps are for the installation of the auxiliary drive shaft.4. Position couplings (6), and install three bolts (5) on each end of the drive shaft. Position auxiliary drive shaft (8), and install six bolts (3).5. Position two supports (9), and install four bolts (7). Position guard (4), and install four bolts (not shown), on the bottom of guard (4).6. Put guard (2) in position, and install four bolts (1).7. Install the floor plate.8. Install the floor panel and seat.