2107997 RADIATOR AS Caterpillar parts
385B
Rating:
Alternative (cross code) number:
CA2107997
210-7997
2107997
CA2107997
210-7997
2107997
Information:
CORE DEPTH
100
mm
CORE HEIGHT
1390
mm
CORE WIDTH
1302
mm
HEIGHT OF TOP TANK
0
mm
NUMBER OF TUBE ROWS
0
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
![MEECOL [Replacement] Car Parking Brake Switch Handbrake E1GT-2B623-CA 2107997 for Ford for Edge MK2 15-19 for S-Max for Chrysler 300 for Challenger for Charger](http://c1.a2109.com/_150/aws_api/31d/31d5m/31d5mvllfol.jpg)
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 2107997:
Information:
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Remove the front fixed axle. Refer to Disassembly and Assembly, "Fixed Axle (Front) - Remove and Install".
Remove the rear oscillating axle. Refer to Disassembly and Assembly, "Oscillating Axle (Rear) - Remove and Install".
Illustration 1 g00337018
Typical ExampleNote: Make sure that the intermediate housing of the differential is positioned on the top when you locate the axle assembly in Tooling (A) .
Remove the service brake from the intermediate housing. Refer to Disassembly and Assembly, "Service Brakes - Remove and Install".
Illustration 2 g00337019
Fasten a suitable lifting device to intermediate housing (1). Remove bolts (2) and intermediate housing assembly (1). The weight of intermediate housing (1) is approximately 57 kg (126 lb).
Illustration 3 g00337020
Illustration 4 g00337021
Remove bolt (3) and bolt lock (4) .Note: Adjusting nuts of two different sizes are used in the bevel gear group. Use Tooling (F) or Tooling (G) to remove the adjusting nuts.
Use Tooling (F) or Tooling (G) to remove the adjusting nut (5) .
Remove locating pin (7), sleeve assembly (6) and bearing cup (8) from intermediate housing (1) .
Illustration 5 g00337022
Remove two bolts (9) that are directly opposite each other. Install Tooling (J) in the bolt holes.
Illustration 6 g01014817
Remove remaining bolts (9). Slide pinion gear assembly (10) away from the differential housing in order to install Tooling (B). Attach a suitable lifting device to pinion gear assembly (10) .
Use a suitable lifting device to remove pinion gear assembly (10). The weight of the pinion gear assembly is approximately 66 kg (145 lb).
Remove the shims and the O-ring seal from the pinion assembly.
Illustration 7 g01014840
Install Tooling (C) on differential assembly (11). Attach a suitable lifting device to Tooling (C) .
Use a suitable lifting device to remove differential assembly (11). The weight of the differential assembly is approximately 109 kg (240 lb).
Illustration 8 g01014848
Turn the remainder of the axle onto the opposite side. Fasten the differential housing to Tooling (A) .
Install Tooling (C) to the rim of axle housing assembly (1). Attach a suitable lifting device to Tooling (C) .
Remove bolts (13). Use a suitable lifting device to remove axle housing (12). The weight of the axle housing assembly is approximately 295 kg (650 lb).
Remove the service brake from the differential housing. Refer to Disassembly and Assembly, "Service Brakes- Remove and Install".
Illustration 9 g00337027
Use Tooling (D) to remove bearing cone (21) .
Illustration 10 g00337028
Turn the differential onto the opposite side. The weight of the differential is approximately 109 kg (240 lb). Use Tooling (E) to remove bearing cone (22).
Remove bolts (24) that hold bevel gear (25) in position. Use a press to remove bevel gear (25) from the differential.
Remove two spring assemblies (23) from the bevel gear.
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Remove the front fixed axle. Refer to Disassembly and Assembly, "Fixed Axle (Front) - Remove and Install".
Remove the rear oscillating axle. Refer to Disassembly and Assembly, "Oscillating Axle (Rear) - Remove and Install".
Illustration 1 g00337018
Typical ExampleNote: Make sure that the intermediate housing of the differential is positioned on the top when you locate the axle assembly in Tooling (A) .
Remove the service brake from the intermediate housing. Refer to Disassembly and Assembly, "Service Brakes - Remove and Install".
Illustration 2 g00337019
Fasten a suitable lifting device to intermediate housing (1). Remove bolts (2) and intermediate housing assembly (1). The weight of intermediate housing (1) is approximately 57 kg (126 lb).
Illustration 3 g00337020
Illustration 4 g00337021
Remove bolt (3) and bolt lock (4) .Note: Adjusting nuts of two different sizes are used in the bevel gear group. Use Tooling (F) or Tooling (G) to remove the adjusting nuts.
Use Tooling (F) or Tooling (G) to remove the adjusting nut (5) .
Remove locating pin (7), sleeve assembly (6) and bearing cup (8) from intermediate housing (1) .
Illustration 5 g00337022
Remove two bolts (9) that are directly opposite each other. Install Tooling (J) in the bolt holes.
Illustration 6 g01014817
Remove remaining bolts (9). Slide pinion gear assembly (10) away from the differential housing in order to install Tooling (B). Attach a suitable lifting device to pinion gear assembly (10) .
Use a suitable lifting device to remove pinion gear assembly (10). The weight of the pinion gear assembly is approximately 66 kg (145 lb).
Remove the shims and the O-ring seal from the pinion assembly.
Illustration 7 g01014840
Install Tooling (C) on differential assembly (11). Attach a suitable lifting device to Tooling (C) .
Use a suitable lifting device to remove differential assembly (11). The weight of the differential assembly is approximately 109 kg (240 lb).
Illustration 8 g01014848
Turn the remainder of the axle onto the opposite side. Fasten the differential housing to Tooling (A) .
Install Tooling (C) to the rim of axle housing assembly (1). Attach a suitable lifting device to Tooling (C) .
Remove bolts (13). Use a suitable lifting device to remove axle housing (12). The weight of the axle housing assembly is approximately 295 kg (650 lb).
Remove the service brake from the differential housing. Refer to Disassembly and Assembly, "Service Brakes- Remove and Install".
Illustration 9 g00337027
Use Tooling (D) to remove bearing cone (21) .
Illustration 10 g00337028
Turn the differential onto the opposite side. The weight of the differential is approximately 109 kg (240 lb). Use Tooling (E) to remove bearing cone (22).
Remove bolts (24) that hold bevel gear (25) in position. Use a press to remove bevel gear (25) from the differential.
Remove two spring assemblies (23) from the bevel gear.
Caterpillar parts catalog:
Parts radiator Caterpillar catalog:
1968139
RADIATOR AS
385B
385B
1516592
RADIATOR AS
345B II, 345B L
345B II, 345B L
2108122
RADIATOR AS
365B L
365B L
2108058
RADIATOR AS
365B L
365B L
1626271
RADIATOR AS
365B L
365B L
365B, 365B II, 365B L
0993462
RADIATOR AND OIL COOLER ASSY.
E120, E140
E120, E140
0967688
RADIATOR AND OIL COOLER ASSY.
E120, E140
E120, E140
365B, 365B II
2108061
RADIATOR AS
365B, 365B II
365B, 365B II