RADIATOR GP 2445812 - Caterpillar

Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-0960 Grease Cartridge 1 Start By:
Release the hydraulic system pressure.
Remove the pitch link.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g06174754
Illustration 2 g06174771Installation Procedure
Install the tilt cylinder (VPAT) in the reverse order of removal.
Illustration 3 g06174797
Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for the correct hydraulic oil level.