RADIATOR GP 2452137 - Caterpillar

Adjustment Procedure
Illustration 3 g01187287
(6) Floor mat
Remove floor mat (6) .
Illustration 4 g01187291
(7) Floorplate
Remove floorplate (7) from the cab.
Illustration 5 g01187289
(9) Cover
Remove cover (9) from the machine.Adjustment (P1)
Illustration 6 g01187306
Main control valve (10) Main relief valve (P1)
Illustration 7 g01156988
Main relief valve (typical example) (13) Locknut (14) Adjustment screw
Loosen locknut (13) . Turn adjustment screw (14) clockwise in order to increase the pressure. Turn adjustment screw (14) counterclockwise in order to decrease the pressure. Tighten locknut (13) after the adjustment is made.Note: Always make final pressure adjustment on pressure rise.Adjustment (P2)
Illustration 8 g01187307
Main control valve (11) Main relief valve (P2)
Illustration 9 g01156988
Main relief valve (typical example) (13) Locknut (14) Adjustment screw
Loosen locknut (13) . Turn adjustment screw (14) clockwise in order to increase the pressure. Turn adjustment screw (14) counterclockwise in order to decrease the pressure. Tighten locknut (13) after the adjustment is made.Note: Always make final pressure adjustment on pressure rise.Adjustment (P3)
Illustration 10 g01187309
Main control valve (12) Main relief valve (P3)
Illustration 11 g01156988
Main relief valve (typical example) (13) Locknut (14) Adjustment screw
Loosen locknut (13) . Turn adjustment screw (14) clockwise in order to increase the pressure. Turn adjustment screw (14) counterclockwise in order to decrease the pressure. Tighten locknut (13) after the adjustment is made.Note: Always make final pressure adjustment on pressure rise.Temporary Setting of the Main Relief Valves
Note: A temporary setting of the main relief valve is required before any line relief valve can be adjusted.
The main relief valve pressure settings should be 24500 250 kPa (3550 36 psi). If the main relief valves are not within the specification, adjust the main relief valve pressure setting to the correct pressure specification before performing the temporary setting. Refer to Testing and Adjusting, "Relief Valve (Main) - Test and Adjust".
Illustration 12 g01187292
Main control valve (10) Main relief valve for the boom, bucket, and left travel control valves (P1) (11) Main relief valve for the stick, auxiliary, and right travel control valves (P2) (12) Main relief valve for the swing and blade control valves (P3)
Illustration 13 g01156988
Main relief valve (typical example) (13) Locknut (14) Adjustment screw
Loosen locknut (13) . Turn adjustment screw (14) clockwise for one half turn. Tighten locknut (13) after the adjustment is made.