RADIATOR GP 2529877 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Illustration 1 g03464137The oil filter (1) is at the rear of the hydraulic tank. The hydraulic tank is located in front of the right tractor wheel.Note: An approved service platform is required to access the hydraulic tank.
Park the machine on level ground. Apply the parking brake.
Lower the trailer to the ground. Shut off the engine.
Clean hydraulic oil filler cap (2). The hydraulic oil filler cap is on top of the hydraulic tank.
The hydraulic oil filler cap is a locking cap. If a padlock is on the cap, remove the padlock. Raise lever (3) to engage the lug.
Turn the hydraulic oil filler cap counterclockwise to remove the cap. Slowly remove the cap to relieve pressure in the hydraulic tank. Replace the cap after you have relieved pressure in the hydraulic tank.
Remove the filter. Discard the filters properly.
Inspect the O-ring seal for the oil filter cover. Replace the O-ring seal if the O-ring is damaged.
Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for further information.