RADIATOR GP 2566852 - Caterpillar

Installation Procedure
Note: Check the O-ring seals for damage. Replace the O-ring seals, if necessary.
Illustration 1 g00945499
Install O-ring seal (8).
Illustration 2 g00945497
Install coupler (7) and spacer (6). Install O-ring seal (5).
Illustration 3 g00945487
Position blade pump (4) and install bolts (3). Tighten bolts (3) to a torque of 55 10 N m (41 7 lb ft). Connect hose assemblies (2).
Illustration 4 g00945486
Position hose assemblies (1) and connect hose assemblies (1).
Close the right, rear door.
Fill the hydraulic tank with oil. Refer to the Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacitites" for the proper lubricant. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for the procedure to check the hydraulic oil level.