2851982 RADIATOR AS Caterpillar parts
D6N
Rating:
Alternative (cross code) number:
CA2851982
285-1982
2851982
CA2851982
285-1982
2851982
Weight: 70 pounds 31 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 2851982:
Information:
Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Special care must be taken not to bend the piston cooling jets because the piston cooling jets are precision aligned with a coolant passage in the pistons.There is only one position for each cooling jet. The notch in the bottom of the piston allows clearance for the piston cooling jet when the piston is at bottom dead center.
Illustration 1 g01133547
Remove bolt (1) and piston cooling jet (2). Installation Procedure
Special care must be taken not to bend the piston cooling jets because the piston cooling jets are precision aligned with a coolant passage in the pistons.There is only one position for each cooling jet. The notch in the bottom of the piston allows clearance for the piston cooling jet when the piston is at bottom dead center.
Illustration 2 g01133547
Position piston cooling jet (2) and install bolt (1). Tighten bolt (1) to a torque of 35 3 N m (26 2 lb ft). End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Special care must be taken not to bend the piston cooling jets because the piston cooling jets are precision aligned with a coolant passage in the pistons.There is only one position for each cooling jet. The notch in the bottom of the piston allows clearance for the piston cooling jet when the piston is at bottom dead center.
Illustration 1 g01133547
Remove bolt (1) and piston cooling jet (2). Installation Procedure
Special care must be taken not to bend the piston cooling jets because the piston cooling jets are precision aligned with a coolant passage in the pistons.There is only one position for each cooling jet. The notch in the bottom of the piston allows clearance for the piston cooling jet when the piston is at bottom dead center.
Illustration 2 g01133547
Position piston cooling jet (2) and install bolt (1). Tighten bolt (1) to a torque of 35 3 N m (26 2 lb ft). End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar parts catalog:
Parts radiator Caterpillar catalog:
2012670
RADIATOR AS
D5N, D6N
D5N, D6N
1883126
RADIATOR AS
D5N, D6N
D5N, D6N
2582162
RADIATOR AS
973C
973C
3174354
RADIATOR & HYD OIL COOLER GP
D3G, D4G, D5G
D3G, D4G, D5G
1789281
RADIATOR GP
D3G, D4G
D3G, D4G
2639604
RADIATOR AS
953C
953C
2332115
RADIATOR AS
561N, D5N
561N, D5N
8G8350
RADIATOR GUARD GROUP
D4H, D5H
D4H, D5H
7N0041
RADIATOR TOP TANK
583K, D8K
583K, D8K
3081228
RADIATOR GP
D5R LGP, D6N
D5R LGP, D6N