RADIATOR GP 3156561 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 180-3033 Stands 4
B 5P-3975 Rubber Lubricant 1
C 138-7575 Link Bracket 1
Illustration 1 g01128532
A typical example
Use a suitable lift truck and install belt (4) on the machine, as shown. Install the suitable blocks under the belt. The weight of the belt is approximately 299 kg (660 lb).
Illustration 2 g01070492
A typical example
Apply Tooling (B) to the belt (4) and tire assembly (8).
Attach a suitable lifting device and Tooling (C) to tire assembly (8). Install tire assembly (8). The weight of tire assembly (8) is approximately 110 kg (242 lb).
Illustration 3 g01071291
A typical example
Install nuts (7) on tire assembly (8). Tighten nuts (7) to a torque of 450 60 N m (333 44 lb ft). Tighten nuts (7) again to a torque of 560 60 N m (415 44 lb ft).
Illustration 4 g01070487
Apply Tooling (B) to belt (4) and tire assembly (5).
Attach a suitable lifting device to tire assembly (5) and install tire assembly (5) on the machine.
Install nuts (6) on tire assembly (5). Tighten nuts (6) to a torque of 420 25 N m (315 19 lb ft).
Charge the track tension system. Refer to Testing and Adjusting, "Accumulator - Test and Charge" in order to charge the hydraulic oil pressure in the accumulator.
Raise the machine and remove the suitable blocks and Tooling (A) from the machine. Lower the machine.
Illustration 5 g02471458
Install support assembly (1), bolt (3), and bolt (2). End By:
Install the tow arm. Refer to Disassembly and Assembly, "Tow Arm - Remove and Install".