RADIATOR GP 3223106 - Caterpillar

16G Shown(1) Use shims as required to get an endplay of ... 0.0 0.5 mm (0.0 .20 in)(2) Torque for six bolts ... 520 20 N m (382 15 lb ft)(3) Torque for eight bolts ... 440 20 N m (320 15 lb ft)(4) Torque for bolts ... 720 55 N m (529 40 lb ft) Quantity ... 14G (four bolts)Quantity ... 16G (two bolts)(5) Use shims as required to get a clearance at point (B) of ... 0.5 mm (.02 in) maximum Circle must be able to rotate 360° without stalling drive motor at 13 800 kPa (2000 psi).(6) With circle in contact with front shoes, adjust screws on side and rear shoes to get a clearance at point (A) of ... 0.8 mm (.03 in) maximum.(7) Torque for bolts ... 700 27 N m (520 20 lb ft) Quantity ... 14G (12 bolts)Quantity ... 16G (10 bolts)(8) With circle in contract with front shoes, assemble screws to obtain circle to pinion adjustment of: 14G ... 50.0 + 2.5 - 0.5 mm (1.97 + .10 - .02 in)16G ... 60.5 + 2.5 - 0.5 mm (2.38 + .10 - .02 in)(9) Torque for nuts ... 570 80 N m (420 60 lb ft) 14G Only(10) Torque for two bolts ... 720 55 N m (529 40 lb ft) 16G Only(11) Torque for six bolts ... 720 55 N m (529 40 lb ft)(12) Torque for nine bolts ... 480 20 N m (350 15 lb ft)(13) Assemble adapter with slotted holes centered with threaded holes in drawbar and yoke assembly.