RADIATOR 3652909 - Caterpillar

25. Use tooling (J) as shown to remove a bearing cup, two bearing cones and a bearing cup from the lower hitch pin bore on the rear main frame. 26. Remove the bolts to remove top and bottom caps (19) and shims from the upper hitch pin bore on the front main frame.27. Remove the lip type seals from the caps. 28. Use tooling (K) as shown to remove a bearing cup, two bearing cones and a bearing cup from the upper hitch pin bore on the front main frame.Connection Of Main Frames
1. Use tool group (A) to install seal (1) in bottom cap (2). Make sure the lip of the seal is toward the inside surface of the bottom cap as shown. Use tool group (A) to install the seal in the top cap. Make sure the lip of the seal is toward the outside surface of the top cap. 2. Install bottom cap (2) on