RADIATOR & HYD OIL COOLER GP 3782133 - Caterpillar

1. Disconnect wire (2) from front support. Remove water elbow clip (3).2. Put a floor jack under the oil pan as a support and remove four bolts (4). Fasten a hoist to the front support.3. Lift the front of the engine with the floor jack and remove four bolts (1) that hold front support to the frame. Remove front support (5). Weight of the support is 60 lb. (27 kg).Install Engine Front Support
1. Put front support (1) in position and install the four bolts that hold it to the front of the engine.2. Lower the front of the engine so weight is on the front support. Install the four bolts that hold the support to the frame.3. Connect wire and install the water elbow clip.end by: a) install vibration damperb) install crankshaft pulleyc) install crankcase guards