RADIATOR GP 5371184 - Caterpillar

Illustration 1 g01431231There are several specific messages on this machine. The location of the messages and the description of the messages are reviewed in this section. Please become familiarized with all messages.Make sure that all of the messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any Caterpillar dealer can provide new messages.Steering Control (1)This message is located on the cab post above the differential steering control.
Illustration 2 g01024657
When the steering lever is moved with the transmission in NEUTRAL or in gear, and the engine is running, the machine will turn. Engage the steering control lock by engaging the parking brake in order to prevent machine movement.
Product Link (2)If your machine is equipped with the Product Link System, this additional message is located in the cab on the rear right C post.
Illustration 3 g01418953The Product Link System is a satellite communication device that transmits information regarding the machine back to Caterpillar and Caterpillar dealers and customers. All logged events and diagnostic codes that are available to the Caterpillar Electronic Technician (ET) on the CAT data link can be sent to the satellite. Information can also be sent to the Product Link System. The information is used to improve Caterpillar products and Caterpillar services.Prelube (3) (if equipped)This message is located next to the engine start switch.
Illustration 4 g01114731
To operate, turn machine start switch to START position, HOLD to activate pre-lubrication system and start engine. When adequate oil pressure is available, pre-lubrication system will disengage, then will AUTOMATICALLY crank engine to start. RELEASE KEY WHEN ENGINE STARTS.
Air Conditioner (4)This message is located on the left side of the front instrument panel.
Illustration 5 g01278310This message for the air conditioner has the appropriate information for the following services: the air conditioner lubricant, the refrigerant charge and the refrigerant capacity.Follow instruction in order to avoid engine damage.Reference: See Operation and Maintenance Manual, "Maintenance Interval Schedule" for all maintenance recommendations.