RADIATOR GP-FOLDED CORE 7E4756 - Caterpillar

Grade Control Menu Screen
Illustration 35 g03813085In the Grade Control Menu, move the highlight to the Blade Sensor Calibration.Reset Factory Defaults
Illustration 36 g03813117To reset to the Factory calibration, in the Blade Sensor Calibration Screen, move the highlight to the Factory Defaults option and press OK
Illustration 37 g03813136
Illustration 38 g03813141
Factory defaults complete screen
Pressing OK again will apply the Factory Default calibrationsCalibrate Sensor
To recalibrate the sensor, follow the steps in the calibration wizard.
Illustration 39 g03813144In the Blade Sensor Calibration Screen select the Calibrate Sensor Option and press OK.
Illustration 40 g03813145Calibrate Sensor Warning MessageWhile using this service feature, all operational alerts and diagnostics will be suppressed on this display. Press OK to continue or BACK to return to the previous menu.Press OK in the warning screen.
Illustration 41 g03813152
Follow the instructions and press the Next softkey
Park on flat, hard ground that is nearly level
Gently lower blade to rest on the ground
Set engine to low idle
Set Parking Brake
Set Implement Lockout
Illustration 42 g03813154
Enter in the measurement of the cutting edge length and press the Next softkey
Illustration 43 g03813163
Measure the average distance from the bottom of the track shoe to the ground. Enter in the measurement for grouser distance and press the Next softkey
Illustration 44 g03813165
Place a level on the top of the cutting edge and measure the blade slope. Enter in the measurement for Blade Slope and press the Next softkey.
Illustration 45 g03813167
Measure the machine mainfall. Place a level on the inside of the left track and measure the slope. Enter in the measurement for Left Track Mainfall and press the Next softkey.
Illustration 46 g03813168
Measure the machine mainfall. Place a level on the inside of the right track and measure the slope. Enter in the measurement for Right Track Mainfall and press the Next softkey.
Illustration 47 g03813169
Press OK to acknowledge the calibration is complete.