RADIATOR GP 7E6181 - Caterpillar

Illustration 4 g00757354
Install wire tie-wrap (19). Wire tie-wrap (19) will secure electrical connector (20) .
Illustration 5 g00757348
Install the headliner in position. Install two plastic retainers (11). Install two plastic retainers to the opposite side of the headliner. The plastic retainers will secure a portion of the headliner.
Illustration 6 g00757347
Connect two wires (10) to light (9) .
Illustration 7 g00757344
Install light (9) into the headliner.
Illustration 8 g00757330
Install face plate opening (8) in position. Secure face plate opening (8) with four screws (7) .
Illustration 9 g00757274
Install speaker cover (6) in position. Secure speaker cover (6) with four screws (5) .
Install the speaker cover on the opposite side.
Illustration 10 g00757266
Install two washers and one nut (17) on the shaft of the window wiper motor.
Illustration 11 g00757193
Install cover (16) .
Apply 4C-4030 Thread Lock Compound to the threads of the window wiper motor.
Illustration 12 g00758020
Install window wiper (14). Install the window wiper at dimension (X). Dimension (X) is the distance from the end of window wiper (14) to the trim on the cab front window. Dimension (X) is 76 mm (3 inch).
Illustration 13 g00757132
Install the washer and nut (12). Torque nut (12) to 24 1 N m (17 1 lb ft).
Close cap (13) over nut (12) .
Illustration 14 g00757135
Install tube (15) of the washer fluid bottle on window wiper blade (14) .
Illustration 15 g00488225
Connect the hose of the washer fluid bottle to the fitting. Install the hose to dimension (A). Dimension (A) is 1.0 mm (0.04 inch).Note: Do not use petroleum lubricants on the hose ends. Do not stretch the hose between connections.
Illustration 16 g00756736
Install mirror (1). Secure the mirror with washer (4) and nut (3) .
Illustration 17 g00756730
Install cap (2) on mirror (1) .
Move the start switch to the ON position.
Move the switch of the front window wiper to the ON position. Check the movement of the wiper blade and the motor operation.