RADIATOR GP 7E8096 - Caterpillar

Illustration 1 g00785319
203-7808 Plate
Illustration 2 g00785445
(1) 203-7811 Monitoring Electronic Control Module (2) 203-7808 Plate (3) 203-7809 Gasket (4) Door Panel (5) 203-7808 Plate
Illustration 3 g00785597
203-7811 Monitoring Electronic Control Module (6) Expansion slots (7) Serial port (8) Remote monitor port (9) Printer port (10) Ethernet port (11) Keyboard port (12) Mouse port (13) +24VDC (14) -24VDC (15) GroundMoving the KT Card from the 146-3117 Monitoring Control or the 162-1662 Monitoring Control to the 203-7811 Monitoring Electronic Control Module .
Remove the cover from the 146-3117 Monitoring Control or the 162-1662 Monitoring Control .
Remove the KT card. See Illustration 4.
Record the dip switch settings. These settings will be needed in order to make the correct setting changes later.
Remove the cover from the 203-7811 Monitoring Electronic Control Module .
Install the KT card in one of the available expansion slots. Refer to Illustration 3.
Replace the cover.
Return to the installation instructions.Configuring the 146-3113 Controller for DH+ Operation
Terminate the MMS application. Open the AB1784KT driver by double clicking on the AB1784KT icon. The AB1784KT icon is located on the bottom of the screen.
Select "Topic Definition" from the "Configure" menu. Highlight the topic "Engine". If "Engine" is not an option in the "Topic Definition" menu, use the "New" button to create the topic "Engine". Select "Modify". Under "Modify", ensure that the following items are selected.
Table 2
Make the Following Settings Under "Modify" submenu    
Highlight from the "Modify" submenu     Select    
PLC Family     SLC500    
Connect Type     Local    
Adapter Card Name     Wonder0    
Data     Node 1    When all changes have been made, hit "Done" or "OK".
Select "Adapter Card Settings" in the "Configure" menu. Highlight "Wonder0". Under "Modify", ensure that the following items are selected.
Table 3
Make the Following Settings Under the "Modify" submenu    
Highlight from "Modify" submenu     Select     Comments    
Card's Data Highway Address     2        
Memory Base Address     D000 or D400 (1)     D000 = Closed, Closed, Open, Closed, Open, Open
D400 = Open, Closed, Open, Closed, Open, Open (default)
Closed = Up
Open = Down    
Type     AB1784KT/B        
Enable Terminating Resistor     Checked        
( 1 ) Must match dip switch settings on KT card. Refer to Illustration 4
Illustration 4 g00784263
KT Card (16) Dip Switch
Select "Systems" from the "Control Panel" menu. Select the topic "Environment Tab". Highlight the "PATH" variable. The existing Path Command should appear in a box that is located on the bottom of the screen. Add the following string to the end of the Path Command:
;C:\program files\factorysuite\ioserver\AB1784KTNote: Notice that there is a semicolon before C: and that there is a space between program and files.After the above changes have been made, press or double-click "SET".
Use Notepad to revise the following file:
C:\mms\dde.cfgNote: Notepad can be found in the "Accessories" folder. The "Accessories" folder can be found in the "Progams" folder which is under the "Start" menu.Revise the fifth line of "C:\mms\dde.cfg". The fifth line will have the text AB1784KF2