RADIATOR & OIL COOLER GP 7I7792 - Caterpillar

Always use a designated pump for oil sampling, and use a separate designated pump for coolant sampling. Using the same pump for both types of samples may contaminate the samples that are being drawn. This contaminate may cause a false analysis and an incorrect interpretation that could lead to concerns by both dealers and customers.
Illustration 1 g03821056
C2.2
Illustration 2 g02625799
C3.3B and C3.8
Refer to the Operation and Maintenance Manual, "Access Doors and Covers" for the location of the service points.
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.
Obtain the sample of the coolant from the radiator. When the system is cool, slowly remove the radiator cap (2).Note: Do not take the sample from the Coolant Overflow Reservoir.Obtain the sample of the coolant as close as possible to the recommended sampling interval. Supplies for collecting samples can be obtained from your Cat dealer.Refer to Operation and Maintenance Manual, "Cooling System Coolant Sample (Level 1) - Obtain" for the guidelines for proper sampling of the coolant.Submit the sample for Level 2 analysis.For additional information about coolant analysis, see Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" or consult your Cat dealer.